Wireless

My setup is in the lab. I'm testing this to move out to multiple remote locations.I'm running 7.98.209 code on the WiSM.I have configured a single 1142 on a state office location mockup wan cuircuit.  The AP is sitting on a trunk port. vlan 1 is nati...

Hi there,I had my 1250 set up to use Radius auth and act as a dhcp server to it's wireless clients. I now have a wireless camera that I wanted to add to the mix but it does not support Radius (EAP) so I've got it configured for WPA2-PSK. When trying ...

I have a problem with my wireless I can not interface dot11 vlan 2 has put this another ip address 20.20.20.1 if I had a client connects to the ssid vlan 2 in this state do not allow ip address gekentand does not work with a static ip address?to tran...

Hi all,i'm having troubles with WLC 2106 controller and several wireless bridges, so i'd like to know if i can fix it in some way.My environment is as follows:1 WLC 2106 with 2 Aironet 1240GI have a production appliance that needs an ethernet port to...

Hi all,I’m new to Cisco wireless and need some guidance with setting up a wireless infrastructure please?I have 2x AIR-AP1141N which I would like to setup both as access points on the same SSID.I’ve been reading up on WDS but got lost as is usually t...

Hello FolksI Defined a  2nd  radius server on the the controller as Backup , i m trying to put it as primary to test if it authenticate the WiFi users  but i received the below pop up,can u pls explain the write way to do that without affecting the c...

Hifollowing problem. We used in our datacenter as a centralized controller aWLC 5508 with software version 6.0.196.0. We use the HREAP feature  for ourremote sites .Now I´ve the problem that somtimes the HREAP VLAN settings for the APs willbe lost. T...

Dear all,ACS is using for wireless user authentication when integrated with AD.we are using eap-fast protocal.when wlc is integrated with acs,we are not able to login to the contrloller through its web interface credentials.what might be the issue.Fo...

Does anyone can tell me if there is any API for the Aironet wireless adapter? I'm trying to get some parameters as the signal strenght from the card to be displayed in my application. I have spent some hours looking that information in this site/foru...

I am using WAP4410N AP for my station testing. I have to automate AP configuration in PERL via SNMP. Can somebody help me to find AP's MIB file? Specifically I failed to find SNMP OID for Encryption type (TKIP or AES). Please help me out in this. Tha...

I have a 4402 used as an Anchor for a WLAN used only for videoconferencing. These devices do not connect to our domain so they cannot use the normal WLANs. The problem we have appears to be jitter. There is a vendor server that these devices connect ...