WLC to l3 switch config ?

[mastanbabu216]

hi all

i have 5508 WLC connected to trunk port of L3 switch .....and i have 3 ssid is mapping 3 vlans in l3 switch.my doubt is wheather i required to create 3 subinterfaces in the L3 switch for 3 ssid's ..or not require.

what is require to configure in L3 switch for the 3 Vlans for 3 ssids.

thanks in advance.

regards,

Venkat

[Surendra BG]

If the routing is happening on that L3 switch, then the Interface Vlans or the sub interfaces should be present for the connectivity..

On the Switch which is doing routing

==============================

1> Int Vlans

2> Layer 2 Vlans

3> Required Vlans allowed on the trunk port connecting to the WLC

On the WLC
==========

1> DYnamic interfaces corresponding to the vlan.

2> WLAN with right dynamic vlan assignment.

Lemme know if this answered ur question and please dont forget to rate the usefull posts!!

Regards

Surendra