WLSE: 2950SX Support

[anystrom]

Does the WLSE support Cisco 2950sx series switches? I currently have serveral buildings with 2950sx-24's and 2950sx-48's with 1100's 1230's and 1130ag AP's attached and when doing discovery the WLSE reports that the attached switches are unsupported. After doing some research, I've found that almost every switch that Cisco has ever made including the 1924 is supported, but the 2950sx isn't listed.

Is this an oversite or is the 2950sx not supported by design? Anyway, it seems that if there is support for the: 1924, 2950c, 2950T, 2924xl, etc. that there should be support for one of Cisco's most popular switches, 2950sx.

[rmushtaq]

It is not currently listed as a supported device at: http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cwparent/cw_1105/wlse/2_11/wlsesdt.htm

[anystrom]

The list makes me wonder if the 2950sx-24 is supported but becauses of a bug in the WLSE never worked. If you look at the list, you'll see an entry for the 2950-24S. There is no such switch model manufactured by Cisco just like the 2950-24C. All 2950 models are listed below.

http://www.cisco.com/en/US/products/hw/switches/ps628/index.html

The 2950C-24 works properly and I suspect that it's the 2950-24C that's listed and I suspect the 2950SX-24 is the 2950-24S which doesn't work properly.

Any thoughts, and if this is an oversite or bug. Is there a proper forum to report it, so that future releases might be updated.