I have cat6513, sup720 (ver 12.2(18)SXF3) and wlsm (ver 2.1(1)). I have L2 and L3 vlan 11 interface (ip in same subnet as wlsm admin vlan) configured on sup720 and "wlan module 2 allowed vlan 11"
I can ping the wlsm from the sup720 (and vice versa) but not from anywhere else on the network (even though all other routers have a route to the vlan 11 subnet).
Without this basic ip connectivity, 1231ap will not be able to register with wlsm and wlsm will not be able to talk to acs server.
any ideas - I think it may be 802.1q related but cannot change native vlan on this backplane connection.
sup720 partial config
=====================
wlan module 2 allowed-vlan 11
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
11 wds active
interface Vlan11
description wlsm management
ip address 192.168.11.1 255.255.255.0
end
--------------------------------------------------------
wlsm partial config
===================
wlan vlan 11
ipaddr 192.168.11.2 255.255.255.0
gateway 192.168.11.1
admin
interface Ethernet0/0
mac-address 0014.1c5b.f19d
no ip address
no cdp enable
hold-queue 2048 in
!
interface Ethernet0/0.11
encapsulation dot1Q 11
ip address 192.168.11.2 255.255.255.0
no cdp enable
!
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.11.1
