Re: A9K-8X100GE-CM - failing to come online

networknewbq · ‎11-11-2022

We've recently installed this line card into our chassis. Upon boot up the RSP comes online just fine however the line card never boots up. It get stuck at MBI-Booting, and then finally after several attempts drops the line card into rommon. Further below is the console output from the line card booting up. Not sure if anyone can help identify what the issue is here. We've tried different chassis and slots and results are the same. AFAIK the RSP880 and this 9010 chassis with line card are all compatible. Is there a license issue thats preventing it from coming online ?

RP/0/RSP0/CPU0:ios#sh lice
Fri Nov 11 22:58:18.259 UTC

Info : There are no features or licenses to display.
RP/0/RSP0/CPU0:ios#

RP/0/RSP0/CPU0:ios#show platform
Fri Nov 11 22:55:45.429 UTC
Node Type State Config State
-----------------------------------------------------------------------------
0/RSP0/CPU0 A9K-RSP880-TR(Active) IOS XR RUN PWR,NSHUT,MON
0/5/CPU0 A9K-8X100GE-CM ROMMON PWR,NSHUT,MON

RP/0/RSP0/CPU0:ios#sh install active
Fri Nov 11 22:56:53.672 UTC
Secure Domain Router: Owner

Node 0/RSP0/CPU0 [RP] [SDR: Owner]
Boot Device: disk0:
Boot Image: /disk0/asr9k-os-mbi-6.6.3/0x100305/mbiasr9k-rsp3.vm
Active Packages:
disk0:asr9k-mini-px-6.6.3
disk0:asr9k-services-infra-6.6.3
disk0:asr9k-video-px-6.6.3
disk0:asr9k-services-px-6.6.3
disk0:asr9k-optic-px-6.6.3
disk0:asr9k-mpls-px-6.6.3
disk0:asr9k-mgbl-px-6.6.3
disk0:asr9k-mcast-px-6.6.3
disk0:asr9k-li-px-6.6.3
disk0:asr9k-k9sec-px-6.6.3
disk0:asr9k-fpd-px-6.6.3
disk0:asr9k-doc-px-6.6.3
disk0:asr9k-bng-px-6.6.3
disk0:asr9k-9000v-nV-px-6.6.3

These are the errors we are getting

LC/0/5/CPU0:Nov 11 22:54:38.498 UTC: prm_server_to[321]: %PLATFORM-NP-0-INIT_ERR : np_thread_channel_bringup After 3 attempt(s), NP2 has failed to initialize.
LC/0/5/CPU0:Nov 11 22:54:44.849 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-0 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 22:54:44.849 UTC: pfm_node_lc[307]: %PLATFORM-NP-1-NP_INIT_FAIL_NO_RESET : Set|prm_server_to[159825]|0x1008000|Persistent NP initialization failure, linecard reload not required.

#run attachCon 0/5/CPU0 - output below from boot up.

RP/0/RSP0/CPU0:ios#hw-module location 0/5/CPU0 reload LC/0/5/CPU0:Nov 11 22:58:43.017 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-2 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 22:58:43.017 UTC: prm_server_to[321]: %PLATFORM-LDA-3-INIT_FAIL : Failed to initialize lda_tomahawk_np_reset_classic 4702 inst 0x2 LC INIT: Failed in NP Reset np (0x00000001 - Operation not permitted) : pkg/bin/prm_server_to : (PID=159825) : -Traceback= 13d1521f cd99efc cee5de6 cee5ea5 ce7e8c6 12f2f79f 42ecab1 4210344 4210ea0 42138c2 4200054

Insyde Console Redirection Option ROM. Ver: 1.20

Console Redirection Index Device Port IRQ BaudRate Status
********************************************** _node_rp[383]: %PLATFORM-CA 1 ISA 3F8 4 6400 OK tected on card 0/5/CPU0

Use the <ESC><Ctrl><M> key sequence for <Ctrl><M>
Use the <ESC><Ctrl><H> key sequence for <Ctrl><H>
Use the <ESC><Ctrl><I> key sequence for <Ctrl><I>
Use the <ESC><Ctrl><J> key sequence for <Ctrl><J>

Use the <ESC><R><ESC><r><ESC><R> key sequence for <Ctrl><Alt><Del> OT_READY : Clear|rspfpga_se

Starting ASR9k initialization ...
Reading both MB and DB cookie
Board Type:0x3d02c5
zl init Octane cards

##########################################################
System Bootstrap, Version 8.43 [ASR9K x86 ROMMON],
Copyright (c) 1994-2014 by Cisco Systems, Inc.
Compiled on Thu 07/21/2016 11:23:36.47

BOARD_TYPE : 0x3d02c5
Rommon : 8.43 (Primary)
IPU FPGA(PL) : 0.16.0 (Primary)
IPU INIT(HW.FPD) : 1.85.0
IPU FSBL(BOOT.BIN) : 1.84.0
IPU LINUX(IMAGE.FPD) : 1.84.0
MELDUN0 FPGA : 1.6.0
MELDUN1 FPGA : 1.6.0
DALLA FPGA : 1.9.0
CBC0 : Part 1=38.23, Part 2=38.23, Act Part=2
Product Number : A9K-8X100GE-CM
Slot Number : 7
==========================================================
Got EMT Mode as 3
Got Boot Mode as 65535

Booting IOS-XR (32 bit Classic XR) - Press Ctrl-c to stop

Checking OS type.
GigUndi Successfully retrieve emt mode as 3

Serial ATA Port 4 : SMART SATA SHSLM32G3BCITHD22
Other Device 1 : SMART SATA SHSLM32G3BCITHD22 Internal EFI ShellEFI Shell version 2.31 [4096.1]
Current running mode 1.1.2

intializing Tomahawk LC RomMon
LC will boot from RP1/RSP1.
Reading both MB and DB cookie
Board Type:0x3d02c5
zl init Octane cards

##########################################################
System Bootstrap, Version 8.43 [ASR9K x86 ROMMON],
Copyright (c) 1994-2014 by Cisco Systems, Inc.
Compiled on Thu 07/21/2016 11:23:36.47

BOARD_TYPE : 0x3d02c5
Rommon : 8.43 (Primary)
IPU FPGA(PL) : 0.16.0 (Primary)
IPU INIT(HW.FPD) : 1.85.0
IPU FSBL(BOOT.BIN) : 1.84.0
IPU LINUX(IMAGE.FPD) : 1.84.0
MELDUN0 FPGA : 1.6.0
MELDUN1 FPGA : 1.6.0
DALLA FPGA : 1.9.0
CBC0 : Part 1=38.23, Part 2=38.23, Act Part=2
==========================================================

CPU reset reason = 5 (CPU_RESET_POR)
Device mapping table
fs0 :HardDisk - Alias hd111e0a1 blk0
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(1,MBR,0x00000000,0x20,0x2FB4FE0)
fs1 :HardDisk - Alias hd111e0a2 blk1
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(2,MBR,0x00000000,0x2FB5000,0x98A800)
blk0 :HardDisk - Alias hd111e0a1 fs0
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(1,MBR,0x00000000,0x20,0x2FB4FE0)
blk1 :HardDisk - Alias hd111e0a2 fs1
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(2,MBR,0x00000000,0x2FB5000,0x98A800)
blk2 :HardDisk - Alias (null)
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(3,MBR,0x00000000,0x393F800,0xC800)
blk3 :HardDisk - Alias (null)
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(4,MBR,0x00000000,0x394C000,0x256800)
blk4 :BlockDevice - Alias (null)
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)
hd111e0a1 :HardDisk - Alias fs0 blk0
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(1,MBR,0x00000000,0x20,0x2FB4FE0)
hd111e0a2 :HardDisk - Alias fs1 blk1
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(2,MBR,0x00000000,0x2FB5000,0x98A800)
Device mapping table
disk0 :HardDisk - Alias hd111e0a1 fs0 blk0
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(1,MBR,0x00000000,0x20,0x2FB4FE0)
Device mapping table
disk0a :HardDisk - Alias hd111e0a2 fs1 blk1
PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(2,MBR,0x00000000,0x2FB5000,0x98A800)
map: Invalid argument - 'fs2:'
SPI Flash: NumonyxN25Q128
The value of autoc is 0xc09c2205
The value of autoc is 0xc09c2205
Marvel Hooper SGMII mode link is NOT UP! port 9
Get Active RSP: RSP0 Active
Marvel Hooper link status get pass! status=0 port 2
Marvel Hooper 10G KR mode link is NOT UP! port 2
Marvel Hooper SGMII mode reset passed! status=0 port=2
Marvel Hooper link status get pass! status=0 port=2
Marvel Hooper SGMII mode link is NOT UP! port=2
Marvel Hooper 10G KR mode set pass! status=0 port=2
Marvel Hooper link status get pass! status=0 port=2
Marvel Hooper 10G KR mode link is UP! port=2
Marvel Hooper Auto Tune Set pass! status=0 port=2
Marvel Hooper SGMII mode link is NOT UP! port 3
Sending Boot Image validation request.
HIT CTRL-C to abort
Interface link changed state to UP.
Interface link state up.
.Received chassis type=0xef02fa

Received BOOT_REMOTE msg.
RACK_NUM = 0, RACK_TYPE=0
Remote image to boot : tftp:/disk0/asr9k-os-mbi-6.6.3/lc/0x3C0266/mbiasr9k-lc-x86e.vm
Marvel Hooper SGMII mode link is NOT UP! port 9
Get Active RSP: RSP0 Active
Marvel Hooper link status get pass! status=0 port 2
Marvel Hooper 10G KR mode link is UP! port 2
Marvel Hooper SGMII mode link is NOT UP! port 3

IP_ADDRESS: 127.0.1.7
IP_SUBNET_MASK: 255.255.0.0
DEFAULT_GATEWAY: 127.0.1.4
TFTP_SERVER: 127.0.1.4
TFTP_FILE: /disk0/asr9k-os-mbi-6.6.3/lc/0x3C0266/mbiasr9k-lc-x86e.vm
TFTP_MACADDR: 56:4b:47:00:08:71
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 2
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: Yes
ETHER_PORT: 3
ETHER_SPEED_MODE: Auto Detect
TFTP attempt 1 of 10

Receiving /disk0/asr9k-os-mbi-6.6.3/lc/0x3C0266/mbiasr9k-lc-x86e.vm from 127.0.1.4 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
File reception completed.

**** check image validation ****
.......BIOS CODE SIGN ENTRY ...

Image ASR9K-Tomahawk verified successfully

#################################################################
Program load complete, Entry point: 0x40d2b8, size: 0x1c66a04
Startup-code initializing, running on Tomahawk (003d02c5)
BSP date: Aug 31 2018 14:36:58
Debugging enabled; debug_flag = 1, vendor_debug_flag = 0
Page Address Extension mode (PAE) enabled with 36bit physical addressing.
Found 24576MB of main memory
Reading back MTRR config from boot processor.
Found LP at APIC ID 2
Found LP at APIC ID 4
Found LP at APIC ID 6
Found LP at APIC ID 8
Found LP at APIC ID 10
IPL reports 6 logical processors
Family = 00000006, Model = 0000003e
6 CPU cores available
Initializing logical processor 0 (APIC ID 0).......OK (BSP)
Initializing logical processor 1 (APIC ID 2).......OK
Initializing logical processor 2 (APIC ID 4).......OK
Initializing logical processor 3 (APIC ID 6).......OK
Initializing logical processor 4 (APIC ID 8).......OK
Initializing logical processor 5 (APIC ID 10).......OK
Chassis Type: ASR9010-V2 (00ef02fa)
Region shmwin1: 50000000:b0000000
Region pakman: b0000000:b8000000
###################################################################################################################################################################

System page at phys:0002b000 user:fed2b000 kern:fed2e000
Starting next program at vfe04a5c4
Kernel Dumper Boot Init
tracelogger: starting tracing in background ring mode
tracelogger running with args: -startring -F 1 -F 2
Use private TLB mappings
Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Jan 01 00:01:08.645PCIE-INFO: pciesvr: set verbose to 5
Jan 01 00:01:08 WARN 02/04/00 PLX p4:NP3 - Current Link Status: down 2.5GT/s(Gen1),Expected Link Status: x1 5GT/s(Gen2).
Jan 01 00:01:08 WARN 02/04/00 PLX p4:NP3 - Current Link Status: down 2.5GT/s(Gen1),Expected Link Status: x1 5GT/s(Gen2).
Jan 01 00:01:08 WARN 02/0b/00 PLX p11:NP0 - Current Link Status: down 2.5GT/s(Gen1),Expected Link Status: x1 5GT/s(Gen2).
Jan 01 00:01:08 WARN 02/0b/00 PLX p11:NP0 - Current Link Status: down 2.5GT/s(Gen1),Expected Link Status: x1 5GT/s(Gen2).
Jan 01 00:01:08 WARN 02/0c/00 PLX p12:NP1 - Current Link Status: down 2.5GT/s(Gen1),Expected Link Status: x1 5GT/s(Gen2).
Jan 01 00:01:08 WARN 02/0c/00 PLX p12:NP1 - Current Link Status: down 2.5GT/s(Gen1),Expected Link Status: x1 5GT/s(Gen2).
Jan 01 00:01:08 WARN 02/0d/00 PLX p13:NP2 - Current Link Status: down 2.5GT/s(Gen1),Expected Link Status: x1 5GT/s(Gen2).
Jan 01 00:01:08 WARN 02/0d/00 PLX p13:NP2 - Current Link Status: down 2.5GT/s(Gen1),Expected Link Status: x1 5GT/s(Gen2).
# Nov 11 23:01:50.657: Install Setup: Preparing devices:
Nov 11 23:01:50.658: Install Setup: Complete
Nov 11 23:01:50.658: Install Setup: Starting package and meta-data sync
Nov 11 23:01:50.659: Install Setup: Syncing package 'asr9k-adv-video-supp-6.6.3':
Nov 11 23:01:50.751: Install Setup: Complete
Nov 11 23:01:50.751: Install Setup: Syncing package 'asr9k-base-6.6.3':
Nov 11 23:01:59.594: Install Setup: Complete
Nov 11 23:01:59.602: Install Setup: Syncing package 'asr9k-bng-6.6.3':
Nov 11 23:01:59.663: Install Setup: Complete
Nov 11 23:01:59.663: Install Setup: Syncing package 'asr9k-ce-6.6.3':
Nov 11 23:01:59.760: Install Setup: Complete
Nov 11 23:01:59.760: Install Setup: Syncing package 'asr9k-cpp-6.6.3':
Nov 11 23:01:59.861: Install Setup: Complete
Nov 11 23:01:59.861: Install Setup: Syncing package 'asr9k-diags-supp-6.6.3':
Nov 11 23:01:59.910: Install Setup: Complete
Nov 11 23:01:59.910: Install Setup: Syncing package 'asr9k-fwding-6.6.3':
Nov 11 23:02:02.709: Install Setup: Complete
Nov 11 23:02:02.711: Install Setup: Syncing package 'asr9k-k9sec-supp-6.6.3':
Nov 11 23:02:02.771: Install Setup: Complete
Nov 11 23:02:02.771: Install Setup: Syncing package 'asr9k-li-6.6.3':
Nov 11 23:02:02.827: Install Setup: Complete
Nov 11 23:02:02.828: Install Setup: Syncing package 'asr9k-mcast-supp-6.6.3':
Nov 11 23:02:03.087: Install Setup: Complete
Nov 11 23:02:03.087: Install Setup: Syncing package 'asr9k-optics-supp-6.6.3':
Nov 11 23:02:03.133: Install Setup: Complete
Nov 11 23:02:03.134: Install Setup: Syncing package 'asr9k-os-mbi-6.6.3':
Nov 11 23:02:05.147: Install Setup: Complete
Nov 11 23:02:05.147: Install Setup: Syncing package 'asr9k-scfclient-6.6.3':
Nov 11 23:02:05.187: Install Setup: Complete
Nov 11 23:02:05.187: Install Setup: Syncing package 'asr9k-service-supp-6.6.3':
Nov 11 23:02:05.295: Install Setup: Complete
Nov 11 23:02:05.295: Install Setup: Syncing package 'asr9k-services-infra-6.6.3':
Nov 11 23:02:05.332: Install Setup: Complete
Nov 11 23:02:05.332: Install Setup: Syncing package 'iosxr-adv-video-6.6.3':
Nov 11 23:02:05.409: Install Setup: Complete
Nov 11 23:02:05.409: Install Setup: Syncing package 'iosxr-bng-6.6.3':
Nov 11 23:02:05.985: Install Setup: Complete
Nov 11 23:02:05.986: Install Setup: Syncing package 'iosxr-ce-6.6.3':
Nov 11 23:02:06.496: Install Setup: Complete
Nov 11 23:02:06.497: Install Setup: Syncing package 'iosxr-common-pd-fib-6.6.3':
Nov 11 23:02:06.709: Install Setup: Complete
Nov 11 23:02:06.709: Install Setup: Syncing package 'iosxr-diags-6.6.3':
Nov 11 23:02:06.763: Install Setup: Complete
Nov 11 23:02:06.764: Install Setup: Syncing package 'iosxr-fwding-6.6.3':
Nov 11 23:02:12.187: Install Setup: Complete
Nov 11 23:02:12.195: Install Setup: Syncing package 'iosxr-gcp-fwding-6.6.3':
Nov 11 23:02:12.444: Install Setup: Complete
Nov 11 23:02:12.445: Install Setup: Syncing package 'iosxr-infra-6.6.3':
Nov 11 23:02:17.151: Install Setup: Complete
Nov 11 23:02:17.156: Install Setup: Syncing package 'iosxr-li-6.6.3':
Nov 11 23:02:17.218: Install Setup: Complete
Nov 11 23:02:17.218: Install Setup: Syncing package 'iosxr-mcast-6.6.3':
Nov 11 23:02:17.546: Install Setup: Complete
Nov 11 23:02:17.546: Install Setup: Syncing package 'iosxr-mpls-6.6.3':
Nov 11 23:02:17.638: Install Setup: Complete
Nov 11 23:02:17.638: Install Setup: Syncing package 'iosxr-routing-6.6.3':
Nov 11 23:02:17.787: Install Setup: Complete
Nov 11 23:02:17.788: Install Setup: Syncing package 'iosxr-security-6.6.3':
Nov 11 23:02:18.371: Install Setup: Complete
Nov 11 23:02:18.372: Install Setup: Syncing package 'iosxr-service-6.6.3':
Nov 11 23:02:18.489: Install Setup: Complete
Nov 11 23:02:18.489: Install Setup: Completed sync of all packages and meta-data
Board rev: Offset = c0, value = 00750003
LC/0/5/CPU0:Nov 11 23:02:26.349 UTC: lda_server[65]: %PLATFORM-LDA-3-TIMING_FAILURE : 1588 timing configuration failure : PWM25 PLL in Meldun is unlocked Cannot configure timing. (0x00000016 - Invalid argument) : pkg/bin/lda_server : (PID=69665) : -Traceback= 87a42d9 eb8df5f 42001a1 4200395 e664014 dda9ef3 dda9e99 dda6f4a 4201bb6 4200054
a9kpreinit: 7 dlls preloaded out of 7
LC/0/5/CPU0:Nov 11 23:02:35.823 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-0 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:02:35.831 UTC: prm_server_to[321]: %PLATFORM-LDA-3-INIT_FAIL : Failed to initialize lda_tomahawk_np_reset_classic 4702 inst 0x0 LC INIT: Failed in NP Reset np (0x00000001 - Operation not permitted) : pkg/bin/prm_server_to : (PID=159825) : -Traceback= 87a421f eaa3efc ebefde6 ebefea5 eb888c6 853a79f 42ecab1 4210344 4210ea0 42138c2 4200054
LC/0/5/CPU0:Nov 11 23:02:37.327 UTC: x86rmon_fpd_agent[420]: %PLATFORM-UPGRADE_FPD-4-DOWN_REV : rommon instance 0 is down-rev (V8.43), upgrade to (V8.49). Use the "upgrade hw-module fpd" CLI in admin mode.
LC/0/5/CPU0:Nov 11 23:02:40.466 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-1 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:02:40.466 UTC: prm_server_to[321]: %PLATFORM-LDA-3-INIT_FAIL : Failed to initialize lda_tomahawk_np_reset_classic 4702 inst 0x1 LC INIT: Failed in NP Reset np (0x00000001 - Operation not permitted) : pkg/bin/prm_server_to : (PID=159825) : -Traceback= 87a421f eaa3efc ebefde6 ebefea5 eb888c6 853a79f 42ecab1 4210344 4210ea0 42138c2 4200054

LC/0/5/CPU0:Nov 11 23:02:45.097 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-2 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:02:45.097 UTC: prm_server_to[321]: %PLATFORM-LDA-3-INIT_FAIL : Failed to initialize lda_tomahawk_np_reset_classic 4702 inst 0x2 LC INIT: Failed in NP Reset np (0x00000001 - Operation not permitted) : pkg/bin/prm_server_to : (PID=159825) : -Traceback= 87a421f eaa3efc ebefde6 ebefea5 eb888c6 853a79f 42ecab1 4210344 4210ea0 42138c2 4200054

LC/0/5/CPU0:Nov 11 23:02:56.004 UTC: prm_server_to[321]: %PLATFORM-NP-0-INIT_ERR : np_thread_channel_bringup After 3 attempt(s), NP3 has failed to initialize.
LC/0/5/CPU0:Nov 11 23:02:56.833 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-0 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:02:56.833 UTC: prm_server_to[321]: %PLATFORM-LDA-3-INIT_FAIL : Failed to initialize lda_tomahawk_np_reset_classic 4702 inst 0x0 LC INIT: Failed in NP Reset np (0x00000001 - Operation not permitted) : pkg/bin/prm_server_to : (PID=159825) : -Traceback= 87a421f eaa3efc ebefde6 ebefea5 eb888c6 853a79f 42e9fbf de2e780
LC/0/5/CPU0:Nov 11 23:02:57.837 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-1 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:02:57.837 UTC: prm_server_to[321]: %PLATFORM-LDA-3-INIT_FAIL : Failed to initialize lda_tomahawk_np_reset_classic 4702 inst 0x1 LC INIT: Failed in NP Reset np (0x00000001 - Operation not permitted) : pkg/bin/prm_server_to : (PID=159825) : -Traceback= 87a421f eaa3efc ebefde6 ebefea5 eb888c6 853a79f 42e9fbf de2e780
LC/0/5/CPU0:Nov 11 23:02:58.841 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-2 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:02:58.841 UTC: prm_server_to[321]: %PLATFORM-LDA-3-INIT_FAIL : Failed to initialize lda_tomahawk_np_reset_classic 4702 inst 0x2 LC INIT: Failed in NP Reset np (0x00000001 - Operation not permitted) : pkg/bin/prm_server_to : (PID=159825) : -Traceback= 87a421f eaa3efc ebefde6 ebefea5 eb888c6 853a79f 42e9fbf de2e780
LC/0/5/CPU0:Nov 11 23:02:59.347 UTC: pfm_node_lc[307]: %PLATFORM-NP-1-NP_INIT_FAIL_NO_RESET : Set|prm_server_to[159825]|0x1008003|Persistent NP initialization failure, linecard reload not required.

LC/0/5/CPU0:Nov 11 23:03:06.871 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-0 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:03:06.871 UTC: prm_server_to[321]: %PLATFORM-LDA-3-INIT_FAIL : Failed to initialize lda_tomahawk_np_reset_classic 4702 inst 0x0 LC INIT: Failed in NP Reset np (0x00000001 - Operation not permitted) : pkg/bin/prm_server_to : (PID=159825) : -Traceback= 87a421f eaa3efc ebefde6 ebefea5 eb888c6 853a79f 42e9fbf de2e780

LC/0/5/CPU0:Nov 11 23:03:07.548 UTC: prm_server_to[321]: %PLATFORM-NP-0-INIT_ERR : np_thread_channel_bringup After 3 attempt(s), NP0 has failed to initialize.
LC/0/5/CPU0:Nov 11 23:03:07.875 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-1 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:03:07.875 UTC: prm_server_to[321]: %PLATFORM-LDA-3-INIT_FAIL : Failed to initialize lda_tomahawk_np_reset_classic 4702 inst 0x1 LC INIT: Failed in NP Reset np (0x00000001 - Operation not permitted) : pkg/bin/prm_server_to : (PID=159825) : -Traceback= 87a421f eaa3efc ebefde6 ebefea5 eb888c6 853a79f 42e9fbf de2e780
LC/0/5/CPU0:Nov 11 23:03:08.551 UTC: prm_server_to[321]: %PLATFORM-NP-0-INIT_ERR : np_thread_channel_bringup After 3 attempt(s), NP1 has failed to initialize.
LC/0/5/CPU0:Nov 11 23:03:08.879 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-2 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:03:08.879 UTC: prm_server_to[321]: %PLATFORM-LDA-3-INIT_FAIL : Failed to initialize lda_tomahawk_np_reset_classic 4702 inst 0x2 LC INIT: Failed in NP Reset np (0x00000001 - Operation not permitted) : pkg/bin/prm_server_to : (PID=159825) : -Traceback= 87a421f eaa3efc ebefde6 ebefea5 eb888c6 853a79f 42e9fbf de2e780
LC/0/5/CPU0:Nov 11 23:03:09.591 UTC: prm_server_to[321]: %PLATFORM-NP-0-INIT_ERR : np_thread_channel_bringup After 3 attempt(s), NP2 has failed to initialize.
LC/0/5/CPU0:Nov 11 23:03:15.906 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-0 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:03:15.906 UTC: pfm_node_lc[307]: %PLATFORM-NP-1-NP_INIT_FAIL_NO_RESET : Set|prm_server_to[159825]|0x1008000|Persistent NP initialization failure, linecard reload not required.
LC/0/5/CPU0:Nov 11 23:03:16.909 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-1 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:03:16.909 UTC: pfm_node_lc[307]: %PLATFORM-NP-1-NP_INIT_FAIL_NO_RESET : Set|prm_server_to[159825]|0x1008001|Persistent NP initialization failure, linecard reload not required.
LC/0/5/CPU0:Nov 11 23:03:17.913 UTC: prm_server_to[321]: %PLATFORM-LDA-1-NP_RESET_FAIL : Failed to bring NP-2 out-of-reset, NP initialisation failed (0x1)
LC/0/5/CPU0:Nov 11 23:03:17.913 UTC: pfm_node_lc[307]: %PLATFORM-NP-1-NP_INIT_FAIL_NO_RESET : Set|prm_server_to[159825]|0x1008002|Persistent NP initialization failure, linecard reload not required.
LC/0/5/CPU0:Nov 11 23:03:18.061 UTC: prm_server_to[321]: %PLATFORM-NP-0-INIT_ERR : Network processor initia
Insyde Console Redirection Option ROM. Ver: 1.20 D : NP initialization faile

tkarnani · ‎11-13-2022

In General this error points to a hardware fault. can you open a tac case on this card?

possibly needs to be replaced with spare

LC/0/5/CPU0:Nov 11 22:54:44.849 UTC: pfm_node_lc[307]: %PLATFORM-NP-1-NP_INIT_FAIL_NO_RESET : Set|prm_server_to[159825]|0x1008000|Persistent NP initialization failure, linecard reload not required.

networknewbq · ‎11-13-2022

Thanks for your reply. Can you point me to anything on Cisco.com that indicates this is a hardware failure? I've spent quite a bit of time looking but unable to identity anything that tells me what the issue is. I unfortunately cannot open TAC case.

smilstea · ‎11-15-2022

We see this error all the time in TAC, you can try to reseat the card, but other than that if the card is in a boot loop and constantly seeing the hardware (NP) failing to start (initialize) then its bad hardware. There is no other recovery or other magic we can try to recover the card.

Sam