Hello, i've got a port that is admin-down and i want to install an optic and enable transmit light. I've tried the commands below and i've got no light on the SFP.#config(config)#controller optics 0/0/0/0(config-Optics)#shut(config-Optics)#dwdm-carri...
Forum Posts
I'm sending a framed-route attribute from Radius server to ASR 9k6. I'm Using l2-connected, DHCP initiated, DHCP server is local, but i'm passing framed-route via radius. I'm running IOS XR 6.4.2 The problem is I see the route is installing correctl...
NCS540 is not passing the benchmark 10G RFC test. The Benchmark test is failing all frame sizes. However, if I bypass the NCS540 network. I get not issues. I posted the Benchmark tests. One of them passes fine when I bypass the NCS540 devices. The ...
Hello everyone,can you help me on this?Are the A9K-2X100GE-SE cards works in configuration with A9K-RSP880-TR without issues or not. SE is higher version, but I believe it would downgrade to TR if paired with TR RSP?is that right?
Resolved! MVPN configuration
Hello All,ios4----(g1)CSR1(g2)---------(g2)CSR2(g1)--------------(gi0/0/0/1)XRv3(gi0/0/0/2)----------(gii0/0/0/2)XRV4(gi0/0/0/0)-----ios5ios4 and ios5 are CE routers.CSR1 and XRV4 are PE routers. CSR3 and XRV3 are P routers.I have done MVPN configura...
Hello, some please share traffic shaping command example in cisco ios xr 6.3.3 I want to bind 100mbps upload & download traffic...
Resolved! FLEX-ALGO configuration in SR-TE
Hello All, I have configured following setup. R1 Gi0/0/0/0 Gi0/0/0/1 / \ Gi0/0/0/0 Gi0/0/0/1 R2----------R3R1, R2 and R3 are XRV9k. I am trying to understand h...
Dearswe have an alert on our monitoring system related to CoherentDSP interface i need to shut down this interface. I did shutdown on the interface and on the controller optics but i still see it on my monitoring system. how i can shut down it?Cohe...
Hi Community,hopefully I can link here this post from Network Management Topics, any help or direction would be highly appreciated.[IOS-XRv ASR9000v] How to send correct SNMPv3 Informs (AuthPriv mode)? Thanks in advance & have a nice day!Vincent Vlk
how to verify TCAM ASR9K IOS-XR ?please help me
Can someone assist me.I have created a bootable USB with ncs540-usb_boot-7.x.x.zip. I moved the zip file to the USB and extracted the ZIP file and moved boot & EFI folders to the root of the USB I insert to the router, power it on, break the boot by ...
hi ,I have a router ADR9000 with ios xr .... when I make reload to the router, the router boots with not confirmation, so I back to the initial config RP/0/RSP0/CPU0:ios#sh ver Sun Mar 12 14:21:54.096 UTC Cisco IOS XR Software, Version 6.7.3[Defau...
Dear colleagues, i'm newbie with ASR9k1 and have a question. Cisco IOS XR Software, Version 6.2.25[Default] We are migrating from C6506 to ASR9001 routers as a BNG with IPoE access technology. And the 1st trouble is usage of two subnets per vl...
Is protocol icmp is in internet layer ???The question ishow we use ping with ipand we know thatIp and icma protocols is in the same layer ???
Hello,I am trying to "tag" with an extcomm a route via a route-policy in network command and I am getting the following error:router bgp 65501address-family ipv4 unicastnetwork 192.168.0.0/24 route-policy TAG_INBOUND(EXT_1, EXT_2, EXT_3)!!% Could not...
