ASR9K leak BGP route between vrf and global

[jefferyshi]

Dear all,

    I want to know if ASR9k support "BGP Support for IP Prefix Export from a VRF Table into the Global Table"

and "BGP Support for IP Prefix Import from a VRF Table into the Global Table" feature?  the IOS command is export ipv4 unicast and import ipv4 unicast. What's the command for ASR9K platform.

Thank You

Jeff

[Evan Roggenkamp · Accepted solution]

I found something that might help:

Configuring VRF Dynamic Route Leaking

Perform these steps to import routes from default-VRF to non-default VRF or to import routes from non-default VRF to default VRF.

Before You Begin

A route-policy is mandatory for configuring dynamic route leaking. Use the route-policy route-policy-name command in global configuration mode to configure a route-policy.

SUMMARY STEPS

1.    configure

2.    vrf vrf_name

3.    address-family {ipv4 | ipv6} unicast

4.    Use one of these options:

• import from default-vrf route-policy route-policy-name [advertise-as-vpn]
• export to default-vrf route-policy route-policy-name

5.    Use the commit or end command.

http://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-3/routing/configuration/guide/b_routing_cg43xcrs/b_routing_cg43xcrs_chapter_010.html#concept_9961DC067F854EEDA4AA461A9EBE2DBD