XR OS and Platforms

hi, i am configuring a bvi in iox-xr (5.3.3 in a crs x). this is the first bvi and first bridge domain configured in the router which replies with the above msg. any help appreciated! tnx in advance mirko

Hi all, I am trying to upload EEM tcl script on bootflash: of virtual Router with IOS XRv but it's not happening using tftp server.  Virtual Router is installed on Vmware VM. Please fine the cli output: RP/0/0/CPU0:CAPGEMINI-DEMO#copy tftp: bootfl...

Hi Experts, We have a customer with a lot of ASR9010 with the V1 chassis, and they want to migrate the RSP-4G to the RSP-880, but I have a doubt about if we also must change the PEMv1 to the PEMv2 or PEMv3. I tried to search for some information abou...

Dear everyone,i 'm going to implementing MPLS L3VPN inter-AS on Metro network with Cisco ASR 9010 as ASBR. I want to use MPLS L3VPN inter-AS option AB.follow this link This documentation has been moved - MPLS VPN - Inter-AS Option AB [Support] - Cisc...

Hi guys, how can I set and send NAS-Identifier attribute to a AAA server, for example , suppose that I have the following scenario:     AAA-server address: 1.1.1.1     My favorite string for NAS-Identifier which should be send: MY-ASR-9912 Thanks

as i known the subscriber sessions limit at 32k per NPU. A9K-24X10GE-SE have 8 NPU // 8X32 = 256k so, If i have ASR-9912 and Add 3*A9K-24X10GE-SE can i reach to 768K sessions?, if not, why?   

Dear All,   How to do the migration of cisco 12410 to cisco  7613 chasis step by step process or related videose.

Hi Guys is it possible to save a file, similar to running-config, on Line Card memory like MOD400 or A9K-24x10GE? Thanks Maurizio

Hi Guys, I have followed this documentation below, but I did not manage to connect to the console. Firewall is configured correctly, but telnet is refused. "The remote system refused the connection." ESXi 6.0 with vCenter server. XRv version id 6.1....

Im currently having this issue with IOS XRV Im trying to create a bridge domain l2vpn bridge group 1 bridge-domain VLAN101 interface GigabitEthernet0/0/0/1.101 ! routed interface BVI101 ! !! but I cant establish isis adjacency netio[314]: %L2-PIRD-4...