12-08-2022 01:20 PM
In ASR9K, I have a bundle-ether20 that has two physical ports as members TenG1/1 & TenG1/2
The bundle-ether20 has two subinterfaces bundle-ether20.1 & bundle-ether20.2
I want to apply ACL on this connection
Q1) Shall this ACL be applied on the physical ports TenG1/1 & TenG1/2, or bundle-ether20
Q2) Shall this ACL be applied on the subinterface ports bundle-ether20.1 & bundle-ether20.2, or bundle-ether20
Many thanks
Solved! Go to Solution.
12-08-2022 02:54 PM
correct.
no need to apply it under the TenG and main interface.
12-08-2022 01:24 PM
any L3 port can apply RACL under it
so ACL will apply under subinterface.
12-08-2022 01:35 PM
Many thanks for the quick response, so in the context of my questions on bundle-ether20.1 & bundle-ether20.2 only
Neither bundle-ether20 nor TenG1/1 & TenG1/2, correct?
12-08-2022 02:51 PM
you need to add ACL to the below only to take effect.(as per the requirement you mentioned)
shall this ACL be applied on the subinterface ports bundle-ether20.1 & bundle-ether20.2,
12-08-2022 02:54 PM
correct.
no need to apply it under the TenG and main interface.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide