Hello guys!
I'm trying to apply autoroute annouce command to PCE initiated LSP by using Configuration group command but without result. It doesn't work. Autoroute disabled for pce initiated LSPs.
May be I do smth wrong. Please help. Or advice another solution
Thanks in advance
IOS-XR 6.0.1
Configuration:
group LSP
interface 'tunnel-te.*'
autoroute announce
...
mpls traffic-eng
interface GigabitEthernet0/0/0/1
!
interface GigabitEthernet0/0/0/2
!
pce
peer source ipv4 10.101.126.1
apply-group LSP
peer ipv4 10.234.10.217
!
logging events peer-status
stateful-client
instantiation
!
!
auto-tunnel pcc
apply-group LSP
tunnel-id min 100 max 199