Perhaps this is best as a TAC case, but thought I'd ask here as well.
I've upgraded to XR5.3.3 and having trouble with recommended SMU CSCux24553 and then CSCuy71556.
CSM says 24553 is recommended and 71556 is optional - although both issues look significant.
I have the required SMUs active (CSCuy63743 and CSCuy38364) but 24553 will not install.
I do not have the 'services-infra' PIE installed as I'm not using CGv6 - although this seems to be the the root of this issue.
I could install it to resolve this issue, but there seems to be a problem here.
This SMU is recommended, but I cannot install it because an optional PIE my router does not use is not loaded.
I've never run into this situation before - I might assume it's an isolated dependency problem.
Any others run into dependency issue like this?
I suppose one could just always load all unnecessary optional PIEs but that breaks a reason for being modular.
===== gory details =====
Install operation 62 '(admin) install activate id 61' started by user <X> via CLI at 09:50:44 EDT Sun Apr 24 2016.
Info: This operation will activate the following package:
Info: disk0:asr9k-px-5.3.3.CSCux24553-1.0.0
Error: Cannot proceed with the activation because of the following package incompatibilities:
Error: asr9k-base-5.3.3.CSCux24553-1.0.0 needs asr9k-services-infra-5.3.3.CSCuy38364-1.0.0 to be active on the
Error: same nodes.
Error: asr9k-os-mbi-5.3.3.CSCux24553-1.0.0 needs asr9k-services-infra-5.3.3.CSCuy38364-1.0.0 to be active on the
Error: same nodes.
Error: Suggested steps to resolve this:
Error: - check the installation instructions.
Error: - activate or deactivate the specified packages on the specified nodes.
(admin)#show inst ac
Sun Apr 24 09:53:28.346 EDT
Secure Domain Router: Owner
Node 0/RSP0/CPU0 [RP] [SDR: Owner]
Boot Device: disk0:
Boot Image: /disk0/asr9k-os-mbi-5.3.3.CSCuy32183-1.0.0/0x100305/mbiasr9k-rsp3.vm
Active Packages:
disk0:asr9k-fpd-px-5.3.3
disk0:asr9k-k9sec-px-5.3.3
disk0:asr9k-mcast-px-5.3.3
disk0:asr9k-mgbl-px-5.3.3
disk0:asr9k-mini-px-5.3.3
disk0:asr9k-mpls-px-5.3.3
disk0:asr9k-optic-px-5.3.3
disk0:asr9k-px-5.3.3.CSCuv63743-1.0.0
disk0:asr9k-px-5.3.3.CSCuw80087-1.0.0
disk0:asr9k-px-5.3.3.CSCuw80979-1.0.0
disk0:asr9k-px-5.3.3.CSCuw82287-1.0.0
disk0:asr9k-px-5.3.3.CSCuw93667-1.0.0
disk0:asr9k-px-5.3.3.CSCux31992-1.0.0
disk0:asr9k-px-5.3.3.CSCux41951-1.0.0
disk0:asr9k-px-5.3.3.CSCux74246-1.0.0
disk0:asr9k-px-5.3.3.CSCux78222-1.0.0
disk0:asr9k-px-5.3.3.CSCux88135-1.0.0
disk0:asr9k-px-5.3.3.CSCux93541-1.0.0
disk0:asr9k-px-5.3.3.CSCux95550-1.0.0
disk0:asr9k-px-5.3.3.CSCuy13233-1.0.0
disk0:asr9k-px-5.3.3.CSCuy17914-1.0.0
disk0:asr9k-px-5.3.3.CSCuy21312-1.0.0
disk0:asr9k-px-5.3.3.CSCuy26915-1.0.0
disk0:asr9k-px-5.3.3.CSCuy32183-1.0.0
disk0:asr9k-px-5.3.3.CSCuy62344-1.0.0
disk0:asr9k-px-5.3.3.CSCuy62419-1.0.0
disk0:asr9k-services-px-5.3.3
disk0:asr9k-px-5.3.3.CSCuw32657-1.0.0
disk0:asr9k-px-5.3.3.CSCux36987-1.0.0
disk0:asr9k-px-5.3.3.CSCuy18491-1.0.0
disk0:asr9k-px-5.3.3.CSCuy27610-1.0.0
disk0:asr9k-px-5.3.3.CSCuy73668-1.0.0
disk0:asr9k-px-5.3.3.CSCuy93579-1.0.0
disk0:asr9k-px-5.3.3.CSCuy38364-1.0.0
If I attempt to reload 38364 I get:
================
(admin)#inst ac disk0:asr9k-px-5.3.3.CSCuy38364-1.0.0
Sun Apr 24 10:10:06.955 EDT
Install operation 93 '(admin) install activate disk0:asr9k-px-5.3.3.CSCuy38364-1.0.0' started by user 'peirce' via CLI
at 10:10:07 EDT Sun Apr 24 2016.
Info: Cannot activate the following package as it is already active on the router:
Info:
Info: disk0:asr9k-os-mbi-5.3.3.CSCuy38364-1.0.0
Info:
Info: After this install operation, some SMU package(s) are fully/partially superceded. The fully superseded SMUs
Info: can found using CLI: 'show install superceded'. If found those can be deactivated using CLI: 'install
Info: deactivate superceded'.
Info: The following SMU is not being activated as it does not apply to any packages on the router:
Info:
Info: disk0:asr9k-services-infra-5.3.3.CSCuy38364-1.0.0
