cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2101
Views
0
Helpful
8
Replies

IOS XR lost his configuration after reload

hi ,
I have a router ADR9000 with ios xr .... 

when I make reload to the router, the router boots with not confirmation, so I back to the initial config 

 

 

RP/0/RSP0/CPU0:ios#sh ver
Sun Mar 12 14:21:54.096 UTC

Cisco IOS XR Software, Version 6.7.3[Default]
Copyright (c) 2020 by Cisco Systems, Inc.

ROM: System Bootstrap, Version 10.68(c) 1994-2019 by Cisco Systems,  Inc.

ios uptime is 4 hours, 54 minutes
System image file is "disk0:asr9k-os-mbi-6.7.3/0x100305/mbiasr9k-rsp3.vm"

cisco ASR9K Series (Intel 686 F6M14S4) processor with 33554432K bytes of memory.
Intel 686 F6M14S4 processor at 1899MHz, Revision 2.174
ASR 9010 8 Line Card Slot Chassis with V1 AC PEM

1 FastEthernet
2 Management Ethernet
24 TenGigE
24 DWDM controller(s)
24 WANPHY controller(s)
375k bytes of non-volatile configuration memory.
6215M bytes of hard disk.
25012208k bytes of disk0: (Sector size 512 bytes).
25012208k bytes of disk1: (Sector size 512 bytes).

 

and error on booting 

RP/0/RSP0/CPU0:Mar 12 09:29:42.116 UTC: cfgmgr-rp[166]: %MGBL-CONFIG-6-STARTUP_ALTERNATE : Configuration Manager can not find any configuration to apply from the alternate source '/harddisk:/no-config'
. Default configuration will be applied. 

 

 

 

 

1 Accepted Solution

Accepted Solutions