Solved: Re: Is NV-Cluster/Edge - still supported on the RSP880 ?

yale.prince@leidos.com · ‎11-01-2018

Is NV-Cluster/Edge - still supported on the RSP880 ?

Peter L · ‎11-01-2018

Hi

You can run nv-cluster with RSP880 (RSP-880-LT will not work).

nv cluster is eol

https://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/eos-eol-notice-c51-739355.html

Will not work in 6.x.x. Think 5.3.4 is the last release that supported nv-cluster.

Regards Peter

View solution in original post

Peter L · ‎11-01-2018

Hi

You can run nv-cluster with RSP880 (RSP-880-LT will not work).

nv cluster is eol

https://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/eos-eol-notice-c51-739355.html

Will not work in 6.x.x. Think 5.3.4 is the last release that supported nv-cluster.

Regards Peter

xr-escalation · ‎11-01-2018

Peter,

NV Cluster/Edge isn’t supported on any of the RSP880s.

Eddie.

Peter L · ‎11-01-2018

Sorry for that Eddie. Thought that this was supported as the 880 has the sfp ports. But i guess i learned something new today :)

xr-escalation · ‎11-01-2018

No problems, yes the SFP EOBC ports are there, but the SW isn’t enabled, we made a business decision to stop supporting the technology from 5.3.4 as you stated correctly.

xr-escalation · ‎11-01-2018

Hi,

No its not supported, if your on NV –Edge we need to work with you to move off that technology, its not supported post released 5.3.4.

Eddie.