cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4563
Views
11
Helpful
2
Replies

issues installing packages: NCS540-iosxr-k9-6.6.3

ossniper
Level 1
Level 1

Hello

 

I really help. I am trying to install NCS540-iosxr-k9-6.6.3.tar Packages, but keep getting this messages:

 

PS: I have installed this image on other routers (via cli ) which was successful and working fine, but i am finding it extremely difficult for this particular router(EFI Usb boot). i don't know what could possibly be the problem..

 

Please what can i do about this and get the packages activated..? 

 

 

RP/0/RP0/CPU0:ios#install prepare ncs540-ospf-1.0.0.0-r663.x86_64.rpm ncs540-m$

Thu Dec 10 13:10:48.379 UTC

Dec 10 13:10:50 Install operation 18 started by root:

 install prepare pkg ncs540-ospf-1.0.0.0-r663.x86_64.rpm ncs540-mpls-te-rsvp-2.0.0.0-r663.x86_64.rpm ncs540-mpls-1.0.0.0-r663.x86_64.rpm ncs540-mgbl-1.0.0.0-r663.x86_64.rpm ncs540-mcast-2.0.0.0-r663.x86_64.rpm ncs540-li-1.0.0.0-r663.x86_64.rpm ncs540-k9sec-1.0.0.0-r663.x86_64.rpm ncs540-isis-1.1.0.0-r663.x86_64.rpm ncs540-eigrp-1.0.0.0-r663.x86_64.rpm

Dec 10 13:10:51 Package list:

Dec 10 13:10:51   ncs540-ospf-1.0.0.0-r663.x86_64.rpm

Dec 10 13:10:51   ncs540-mpls-te-rsvp-2.0.0.0-r663.x86_64.rpm

Dec 10 13:10:51   ncs540-mpls-1.0.0.0-r663.x86_64.rpm

Dec 10 13:10:51   ncs540-mgbl-1.0.0.0-r663.x86_64.rpm

Dec 10 13:10:51   ncs540-mcast-2.0.0.0-r663.x86_64.rpm

Dec 10 13:10:51   ncs540-li-1.0.0.0-r663.x86_64.rpm

Dec 10 13:10:51   ncs540-k9sec-1.0.0.0-r663.x86_64.rpm

Dec 10 13:10:51   ncs540-isis-1.1.0.0-r663.x86_64.rpm

Dec 10 13:10:51   ncs540-eigrp-1.0.0.0-r663.x86_64.rpm

Dec 10 13:10:59 Install operation will continue in the background

RP/0/RP0/CPU0:ios#Dec 10 13:11:01 Install operation 18 aborted

RP/0/RP0/CPU0:Dec 10 13:11:01.489 UTC: sdr_instmgr[1199]: %INSTALL-INSTMGR-3-OPERATION_ABORT : Install operation 18 aborted

 

 

RP/0/RP0/CPU0:ios#install prepare id 6

Thu Dec 10 13:11:38.122 UTC

Dec 10 13:11:39 Install operation 19 started by root:

 install prepare id 6

Dec 10 13:11:40 Package list:

Dec 10 13:11:40   ncs540-isis-1.1.0.0-r663.x86_64

Dec 10 13:11:40   ncs540-mpls-1.0.0.0-r663.x86_64

Dec 10 13:11:40   ncs540-mini-x-6.6.3

Dec 10 13:11:40   ncs540-eigrp-1.0.0.0-r663.x86_64

Dec 10 13:11:40   ncs540-mgbl-1.0.0.0-r663.x86_64

Dec 10 13:11:40   ncs540-mcast-2.0.0.0-r663.x86_64

Dec 10 13:11:40   ncs540-k9sec-1.0.0.0-r663.x86_64

Dec 10 13:11:40   ncs540-ospf-1.0.0.0-r663.x86_64

Dec 10 13:11:40   ncs540-li-1.0.0.0-r663.x86_64

Dec 10 13:11:40   ncs540-mpls-te-rsvp-2.0.0.0-r663.x86_64

Dec 10 13:11:47 Install operation will continue in the background

RP/0/RP0/CPU0:ios#Dec 10 13:11:47 Running image version is same as which is being activated, this is not supported. If you intended to upgrade to different image version , please correct the version and retry the operation

Dec 10 13:11:49 Install operation 19 aborted

RP/0/RP0/CPU0:Dec 10 13:11:49.465 UTC: sdr_instmgr[1199]: %INSTALL-INSTMGR-3-OPERATION_ABORT : Install operation 19 aborted

 

 

 

 

Grazie,

Osman Akin

1 Accepted Solution

Accepted Solutions

tkarnani
Cisco Employee
Cisco Employee

Hi.

 

can we remove the mini from the tar file and just have the RPMS? (Dec 10 13:11:40   ncs540-mini-x-6.6.3)

once you have the .tar file copy it to the disk.

 

install add source harddisk:/ file.tar  

(there is a space between / and f)

 

install activate id <>  (this will be the same id you get from install add)

 

lets try this, if it fails please provide show install log reverse/detail

we can check to see why it failed

 

Thanks

View solution in original post

2 Replies 2

tkarnani
Cisco Employee
Cisco Employee

Hi.

 

can we remove the mini from the tar file and just have the RPMS? (Dec 10 13:11:40   ncs540-mini-x-6.6.3)

once you have the .tar file copy it to the disk.

 

install add source harddisk:/ file.tar  

(there is a space between / and f)

 

install activate id <>  (this will be the same id you get from install add)

 

lets try this, if it fails please provide show install log reverse/detail

we can check to see why it failed

 

Thanks

Thanks so much @tkarnani 

I really appreciate your help and support.

 

Its successful and commited

 

RP/0/RP0/CPU0:ios#install add source harddisk:/ NCS540-iosxr-k9-6.6.3.tar
Thu Dec 10 14:30:38.176 UTC
Dec 10 14:30:40 Install operation 21 started by root:
install add source harddisk:/ NCS540-iosxr-k9-6.6.3.tar
Dec 10 14:30:47 Install operation will continue in the background
RP/0/RP0/CPU0:ios#Dec 10 14:31:40 It is a NO IMPACT OPERATION as all packages have already been added
Dec 10 14:31:42 Install operation 21 finished successfully
RP/0/RP0/CPU0:Dec 10 14:31:42.742 UTC: sdr_instmgr[1199]: %INSTALL-INSTMGR-2-OPERATION_SUCCESS : Install operation 21 finished successfully

RP/0/RP0/CPU0:ios#install activate id 21
Thu Dec 10 14:33:17.147 UTC
Dec 10 14:33:19 Install operation 22 started by root:
install activate id 21
Dec 10 14:33:19 Package list:
Dec 10 14:33:19 ncs540-isis-1.1.0.0-r663.x86_64
Dec 10 14:33:19 ncs540-mpls-1.0.0.0-r663.x86_64
Dec 10 14:33:19 ncs540-eigrp-1.0.0.0-r663.x86_64
Dec 10 14:33:19 ncs540-mgbl-1.0.0.0-r663.x86_64
Dec 10 14:33:19 ncs540-mcast-2.0.0.0-r663.x86_64
Dec 10 14:33:19 ncs540-k9sec-1.0.0.0-r663.x86_64
Dec 10 14:33:19 ncs540-ospf-1.0.0.0-r663.x86_64
Dec 10 14:33:19 ncs540-li-1.0.0.0-r663.x86_64
Dec 10 14:33:19 ncs540-mpls-te-rsvp-2.0.0.0-r663.x86_64
Dec 10 14:33:56 Install operation will continue in the background
RP/0/RP0/CPU0:ios#
*
* The idle timeout is soon to expire on this line
*
RP/0/RP0/CPU0:ios#sh install requ
Thu Dec 10 14:47:26.387 UTC
User root, Op Id 22
install activate
ncs540-isis-1.1.0.0-r663.x86_64
ncs540-mpls-1.0.0.0-r663.x86_64
ncs540-eigrp-1.0.0.0-r663.x86_64
ncs540-mgbl-1.0.0.0-r663.x86_64
ncs540-mcast-2.0.0.0-r663.x86_64
ncs540-k9sec-1.0.0.0-r663.x86_64
ncs540-ospf-1.0.0.0-r663.x86_64
ncs540-li-1.0.0.0-r663.x86_64
ncs540-mpls-te-rsvp-2.0.0.0-r663.x86_64
The install operation 22 is 86% complete.
Activating package 9 (ncs540-k9sec-1.0.0.0-r663.x86_64)
Node(s) State %Completed Action
--------------------------------------------------------------------------------
Node 0/RP0/CPU0 : Completed 100% Software change complete
Node 0/0/CPU0 : Completed 100% Software change complete

RP/0/RP0/CPU0:ios#sh install active
Thu Dec 10 14:47:36.495 UTC
RP/0/RP0/CPU0:Dec 10 14:47:36.933 UTC: sdr_instmgr[1199]: %INSTALL-INSTMGR-2-OPERATION_SUCCESS : Install operation 22 finished successfully
Install operation is in progress.
Please use 'show install request' to monitor the status.
RP/0/RP0/CPU0:ios#sh install inactive
Thu Dec 10 14:47:57.121 UTC
1 inactive package(s) found:
ncs540-mini-x-6.6.3
RP/0/RP0/CPU0:ios#sh install active
Thu Dec 10 14:48:30.788 UTC
Node 0/RP0/CPU0 [RP]
Boot Partition: xr_lv0
Active Packages: 10
ncs540-xr-6.6.3 version=6.6.3 [Boot image]
ncs540-eigrp-1.0.0.0-r663
ncs540-mpls-1.0.0.0-r663
ncs540-isis-1.1.0.0-r663
ncs540-li-1.0.0.0-r663
ncs540-mpls-te-rsvp-2.0.0.0-r663
ncs540-ospf-1.0.0.0-r663
ncs540-mcast-2.0.0.0-r663
ncs540-mgbl-1.0.0.0-r663
ncs540-k9sec-1.0.0.0-r663

Node 0/0/CPU0 [LC]
Boot Partition: xr_lcp_lv0
Active Packages: 10
ncs540-xr-6.6.3 version=6.6.3 [Boot image]
ncs540-eigrp-1.0.0.0-r663
ncs540-mpls-1.0.0.0-r663
ncs540-isis-1.1.0.0-r663
ncs540-li-1.0.0.0-r663
ncs540-mpls-te-rsvp-2.0.0.0-r663
ncs540-ospf-1.0.0.0-r663
ncs540-mcast-2.0.0.0-r663
ncs540-mgbl-1.0.0.0-r663
ncs540-k9sec-1.0.0.0-r663