License & HDD required for Upgrading IOS to IOS-XR in C12000
We are in the process of upgrading to IOS-XR in C12000. I have gone through the documents that the basic hardware and software prerequisites should be met for upgrading to IOS-XR.
1. The hardware is meeting all the prerequisites and I am planning to test IOS-XR but would like to know if any license to be purchased for Upgrading to XR. Because when I checked in Dynamic confiugration tool, I found "Cisco XR 12000 RP Memory Upgrade Kit" "XR-C12K-LCONV".
2. Also how about the HDD that XR requires as the current hardware configuration do not have and even the Cisco document does not specify about HDD.
loadbalancing is one of the more complex items in hardware forwarding. of course we have talked about it many years on cisco live (id 2904) with ever incrementing more detail. and there is the support forum article on loadbalancing.
IntroductionArchitecture Building BlocksIOS-XR RoutersConfigurationPerformance VerificationOptimizationStrict timerSome more verificationThe CollectorInfluxDBDatabase statistics and HealthClosing comments
This document was written in collaboration with:
IOS-XR MPLS TE Auto Tunnel Backup Bandwidth Protection Current Implementation of MPLS TE Auto Tunnel BackupPotential issue with current implementation of MPLS TE auto tunnel backupEnhancement to MPLS TE auto backup in IOS XR 7.5.1Supported HardwareConfig ...
we are trying to monitor the Cisco 9148s SFP status, and have get the Sensor's dBm value from the CISCO-ENTITY-SENSOR-MIB table, meanwile , it has an Index value like "30000xxxx",such as "30001773", entsensorValueTable but we can't sure how to l...
Check out our latest release on Cisco Routed Optical Networking solution. Listen: https://smarturl.it/CCRS8E24Follow us: https://twitter.com/ciscochampion Disruptive network transformation may only happen once a decade. First movers c...