10-04-2013 12:16 PM
hello all, I have an RSA 9000 and want to configure NTP I get the following error:
RP/0/RSP0/CPU0:InetGateway_4M(config)#show configuration failed
Tue Oct 1 18:45:45.094 utc
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.
ntp
server 172.17.255.18 version 3
!!% 'CfgMgr' detected the 'fatal' condition 'This configuration has not been verified and can not be accepted by the system.'
!
end
RP/0/RSP0/CPU0:InetGateway_4M(config)#
as you can see the commando i was use is ok,
why that? previously the configure worked without problems after changing the server ip address and reconfigure this problem showed up, somebody would know what is the problem?
10-08-2013 08:45 AM
Freddy,
Are you also seeing this accompanied by sysdb timeouts? Can you look at the syslog at this time frame and let us know what else you see? Also, get the output of "show process blocked location all".
Thanks,
Bryan
10-10-2013 07:00 AM
Hi Bryan, hiow are you? here is the show process blocked location all
RP/0/RSP0/CPU0:Gateway#sh processes blocked location all
Thu Oct 10 03:49:34.567 utc
node: node0_0_CPU0
------------------------------------------------------------------
Jid Pid Tid Name State TimeInState Blocked-on
92 40984 2 umass-enum Reply 474:30:37:0417 1 kernel
92 40984 5 umass-enum Reply 474:30:26:0676 45084 io-usb
92 40984 6 umass-enum Reply 474:30:26:0679 1 kernel
52 40985 1 ksh Reply 474:30:37:0362 12297 serdrvr
51 49179 2 attachd Reply 474:30:34:0664 45090 eth_server
51 49179 3 attachd Reply 474:30:34:0664 16398 mqueue
65571 45091 2 devb-umass Reply 474:30:26:0418 45084 io-usb
85 49188 6 qnet Reply 0:00:00:0000 45090 eth_server
85 49188 7 qnet Reply 0:00:00:0000 45090 eth_server
50 49193 2 attach_server Reply 474:30:34:0345 16398 mqueue
node: node0_1_CPU0
------------------------------------------------------------------
92 40984 2 umass-enum Reply 474:30:36:0718 1 kernel
92 40984 5 umass-enum Reply 474:30:25:0986 45084 io-usb
92 40984 6 umass-enum Reply 474:30:25:0988 1 kernel
52 40985 1 ksh Reply 474:30:36:0671 12297 serdrvr
51 49179 2 attachd Reply 474:30:33:0970 45090 eth_server
51 49179 3 attachd Reply 474:30:33:0970 16398 mqueue
65571 45091 2 devb-umass Reply 474:30:25:0772 45084 io-usb
85 49188 6 qnet Reply 0:00:00:0000 45090 eth_server
85 49188 7 qnet Reply 0:00:00:0000 45090 eth_server
50 49193 2 attach_server Reply 474:30:33:0620 16398 mqueue
node: node0_2_CPU0
------------------------------------------------------------------
92 40984 2 umass-enum Reply 474:30:45:0529 1 kernel
92 40984 5 umass-enum Reply 474:30:34:0788 45084 io-usb
92 40984 6 umass-enum Reply 474:30:34:0791 1 kernel
52 40985 1 ksh Reply 474:30:45:0472 12297 serdrvr
51 49179 2 attachd Reply 474:30:42:0784 45090 eth_server
51 49179 3 attachd Reply 474:30:42:0785 16398 mqueue
65571 45091 2 devb-umass Reply 474:30:34:0635 45084 io-usb
85 49188 6 qnet Reply 0:00:00:0000 45090 eth_server
85 49188 7 qnet Reply 0:00:00:0000 45090 eth_server
50 49193 2 attach_server Reply 474:30:42:0421 16398 mqueue
node: node0_3_CPU0
------------------------------------------------------------------
92 40984 2 umass-enum Reply 474:30:41:0208 1 kernel
92 40984 5 umass-enum Reply 474:30:30:0466 45084 io-usb
92 40984 6 umass-enum Reply 474:30:30:0469 1 kernel
52 40985 1 ksh Reply 474:30:41:0148 12297 serdrvr
51 49179 2 attachd Reply 474:30:38:0455 45090 eth_server
51 49179 3 attachd Reply 474:30:38:0454 16398 mqueue
65571 45091 2 devb-umass Reply 474:30:30:0295 45084 io-usb
85 49188 6 qnet Reply 0:00:00:0000 45090 eth_server
85 49188 7 qnet Reply 0:00:00:0000 45090 eth_server
50 49193 2 attach_server Reply 474:30:38:0141 16398 mqueue
node: node0_RSP0_CPU0
------------------------------------------------------------------
65547 952893451 1 ksh Reply 161:56:57:0921 12298 devc-conaux
95 36891 2 umass-enum Reply 474:29:04:0330 1 kernel
95 36891 6 umass-enum Reply 474:29:01:0984 110640 io-usb
95 36891 7 umass-enum Reply 474:29:01:0984 1 kernel
52 110624 2 attachd Reply 474:29:05:0372 106534 eth_server
52 110624 3 attachd Reply 474:29:05:0371 16398 mqueue
87 110631 6 qnet Reply 0:00:00:0001 106534 eth_server
51 110637 2 attach_server Reply 474:29:05:0337 16398 mqueue
65585 110641 2 devb-umass Reply 0:00:04:0444 110640 io-usb
415 200796 1 tftp_server Reply 474:28:33:0582 16398 mqueue
312 561316 2 lpts_fm Reply 0:00:01:0937 573639 lpts_pa
65831 16658727 1 exec Reply 0:00:06:0846 577791 devc-vty
65849 49131833 1 more Reply 0:00:00:0029 577791 devc-vty
65850 49131834 1 show_processes Reply 0:00:00:0000 1 kernel
65854 48972094 1 exec Reply 0:00:04:0521 1 kernel
node: node0_RSP1_CPU0
------------------------------------------------------------------
65547 12299 1 ksh Reply 472:37:55:0808 12297 devc-conaux
95 36891 2 umass-enum Reply 472:37:55:0148 1 kernel
95 36891 6 umass-enum Reply 472:37:52:0801 110640 io-usb
95 36891 7 umass-enum Reply 472:37:52:0804 1 kernel
52 110624 2 attachd Reply 472:37:56:0211 106534 eth_server
52 110624 3 attachd Reply 472:37:56:0213 16398 mqueue
87 110631 6 qnet Reply 0:00:00:0000 106534 eth_server
87 110631 7 qnet Reply 0:00:00:0000 106534 eth_server
51 110637 2 attach_server Reply 472:37:56:0287 16398 mqueue
65585 110641 2 devb-umass Reply 0:00:50:0996 110640 io-usb
159 200790 1 cfg_helper Reply 0:00:00:0000 200788 node 0/RSP0/CPU0 shelfmgr
415 200797 1 tftp_server Reply 472:36:51:0844 16398 mqueue
312 561368 2 lpts_fm Reply 472:36:33:0169 573639 node 0/RSP0/CPU0 lpts_pa
RP/0/RSP0/CPU0:Gateway#sh runn ntp
Thu Oct 10 03:50:18.338 utc
% No such configuration item(s)
10-08-2013 06:32 PM
Hey Fredy,
which release is this ? can you also get the "show run ntp" ?
May be the whole console logs on what you are trying to do.
Thanks
Venkat Nagarajan.
10-09-2013 05:09 AM
might be a process block also. what version was this again?
maybe do a proc restart on ntpd and then recommit the changes, or in stages, first ntp, commit, server commit, version commit and see which phase stagnates.
xander
10-10-2013 07:05 AM
Alexander,
i didn't find the process restar ntp, how is it process?
10-10-2013 07:03 AM
Narvenka the release is the
asr9k-os V4.3.0
nothing is display wtih the "sh run ntp"
RP/0/RSP0/CPU0:Gateway#sh runn ntp
Thu Oct 10 03:50:18.338 utc
% No such configuration item(s)
10-10-2013 07:28 AM
can you please issue "process restart ntpd loc all"
something like below:
RP/0/RSP0/CPU0:GOT#process restart ntpd
RP/0/RSP0/CPU0:Oct 10 07:24:07.189 : sysmgr_control[65762]: %OS-SYSMGR-4-PROC_RESTART_NAME : User lab (con0_RSP0_CPU0) requested a restart of process ntpd at 0/RSP0/CPU0
10-10-2013 07:43 AM
Narvenka,
that process restart have any impact? because the device is in production.
10-21-2013 10:52 AM
Ideally this wont impact any services. please issue process restart ntpd.
10-10-2013 07:48 AM
here is an output that can help you.
RP/0/RSP0/CPU0:Gateway#show proc ntpd
Wed Oct 9 09:11:55.389 utc
Job Id: 260
PID: 557211
Executable path: /disk0/iosxr-infra-4.3.0/0x100305/bin/ntpd
Instance #: 1
Version ID: 00.00.0000
Respawn: ON
Respawn count: 1
Max. spawns per minute: 12
Last started: Fri Sep 20 08:21:20 2013
Process state: Run
Package state: Normal
Process group: dlrsc
core: MAINMEM
Max. core: 0
Level: 120
Placement: None
startup_path: /pkg/startup/ip_ntp.startup
Ready: 0.256s
Process cpu time: 1.990 user, 0.021 kernel, 2.011 total
JID TID CPU Stack pri state TimeInState HR:MM:SS:MSEC NAME
260 1 1 52K 10 Receive 0:00:00:0030 0:00:01:0009 ntpd
260 2 3 52K 10 Receive 455:50:34:0246 0:00:00:0000 ntpd
260 3 2 52K 10 Receive 455:50:34:0196 0:00:00:0000 ntpd
260 4 3 52K 10 Nanosleep 0:00:00:0180 0:00:00:0843 ntpd
260 5 3 52K 10 Receive 0:00:02:0197 0:00:00:0156 ntpd
-------------------------------------------------------------------------------
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide