cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1483
Views
0
Helpful
3
Replies

Number of BVI/BDI support on ASR9k (9001 and 9901)

mubi.malik
Level 1
Level 1

Hi Everyone,

 

can anyone please confirm that what is the maximum number of BVI/BDI and number of Bridge domains supported on Cisco ASR9k

3 Replies 3

Adam Vitkovsky
Level 3
Level 3

Hi,

According to the below example (RSPs and LCs are Typhoon cards),

System capability:

  Max BVI interface supported : 16000

Node 0/0/CPU0 capability:

   Max BVI interfaces: 4000

 

 -not much if you ask me, especially when I can have only one BD per VXLAN,

So yes you’re much better of just using an external loop cable so you can provide L3 for BDs on sub-interfaces (as those scale much better).


===========================================
L2 SCALING NUMBERS
===========================================
RP/0/RSP0/CPU0:#show l2vpn capability
Sun Aug 19 13:06:11.625 EDT
Capability mode: mixed-mode
L2vpn all-capable: N
System capability:
  VPLS Max MAC addresses: 128000
  VPLS Max bridge-domains: 65536
  VPLS Max attachment circuits: 131072
  VPLS Max pseudowires: 131072
  RSI bit size: 11
  Per-AC drop counters supported: Y
  VPLS Preferred path allowed: Y
  VPLS Preferred path fallback enable allowed: Y
  VPLS Preferred path fallback disable allowed: Y
  MAC withdrawal allowed: Y
  Max attachment circuits per bridge-domain: 16384
  VPLS Max virtual forwarding interfaces: 65536
  VPLS Max virtual forwarding interfaces per bridge-domain: 1
  VPLS Max pseudowires per bridge-domain: 512
  VPLS Max pseudowires per virtual forwarding interface: 512
  VPWS PW redundancy supported: Y
  VPLS Access PW supported: Y
  Bundle AC supported: Y
  Security config supported: Y
  DHCP snooping supported: Y
  VPLS Static MAC filter supported: Y
  VPLS MAC configs on bridge port supported: Y
  VPLS Flooding config on bridge port supported: Y
  Flood unknown unicast disable supported: Y
  IGMP snooping supported: Y
  MMRP flood optimization supported: Y
  MMRP flood optimization max multicast address entries: 8192
  MMRP flood optimization max PW participants: 262144
  VPLS MAC Aging Default Timer Value: 300
  VPLS MAC Aging Min Timer Value: 300
  VPLS MAC Aging Max Timer Value: 30000
  VPWS Max attachment circuits: 131072
  VPWS Max pseudowires: 131072
  VPWS Preferred path fallback enable allowed: Y
  VPWS Preferred path fallback disable allowed: Y
  VPLS allowed: Y
  VPLS Default MAC limit: 4000 [DEFAULT]
  Split Horizon Group supported: Y [DEFAULT]
  VPLS Max MAC addresses per bridge-domain: 128000
  VPWS allowed: Y
  VPWS Max xconnects: 131072
  Ignore MTU Check: Y [,,,,Ether,,,,,HDLC,FR DLCI,,PPP,,,,,,,,,EFP,,,,,PWHE-L2IF,]
  Multi-segment Psweudowires supported: Y [DEFAULT]
  VPWS Local switcing (AC-AC XCs) supported: Y
  VPWS regular AC-PW Cross-connects supported: Y
  VPLS BGP Autodiscovery and BGP Signaling supported: Y [DEFAULT]
  VPLS BGP Autodiscovery and LDP Signaling supported: Y [DEFAULT]
  VPWS BGP Autodiscovery and BGP Signaling supported: Y [DEFAULT]
  Broadcast Storm Control supported: Y [DEFAULT]
  Provider Backbone Bridge supported: Y
  IB Backbone Edge Bridge supported: Y
  I Backbone Edge Bridge supported: N
  B Backbone Edge Bridge supported: N
  Maximum i-SID per system: 65536
  Maximum PBB edge BD per system: 65536
  Maximum PBB core BD per system: 65536
  Per PBB edge BP MAC limit supported: N
  Per PBB core BP MAC limit supported: N
  Per PBB edge BP DHCP snooping supported: N
  Per PBB core BP DHCP snooping supported: N
  Per PBB edge BP IGMP snooping supported: N
  Per PBB core BP IGMP snooping supported: N
  PBB Edge Access PW supported: Y
  PBB Core Access PW supported: Y
  PBB Edge VFI supported: Y
  PBB Core VFI supported: Y
  Maximum EVPN BD per system: 65536
  Sequencing in MPLS Core : Y
  Sequencing in L2TP (IP) Core : Y
  Max Interflex interfaces per cross-connect: 0
  Max Interflex interfaces per bridge domain: 1
  IPv4 Interworking : Y
  Ethernet Interworking : N
  MVRP supported: Y
  DAI supported: Y
  IPSG supported: Y
  MAC Secure supported: Y
  Max BVI interface supported : 16000
  Max bundle attachment circuits: 131072
  Max global xconnect id: 262144
  PW-SPAN supported: Y
  Max ethernet ring g8032: 160
  Max instance per ethernet ring g8032: 2
  Ethernet ring G8032 supported: Y
  Ethernet ring G8032 virtual channel supported: N
  MAX PWHE interfaces supported : 15200
  Interface-list supported : Y
  MAX interface list per peer : 8
  MAX interfaces per interface list : 8
  PWHE supports interface-list : Y
  PWHE needs interface-list : Y
  Flow Load Balancing supported: Y
  CEM functionality supported: Y [DEFAULT]
  PW-IW supported : Y
  TCN propagation supported: Y
  Transport Mode VLAN passthrough supported: Y
  P2P backup supported: Y
  PW-P2MP supported: Y
  Setup ATM PW forwarding supported: Y
  VPLS coupled-mode supported: Y
  Dynamic platform capability supported: Y
  Dual XID global pool platform capability supported: Y [DEFAULT]
  IPv6 Pseudowires supported: Y
  Max IPv6 Pseudowires supported: 15360
  Bridge-domain storm-control supported: Y
  MIRP-lite supported: Y
  PBB-VPLS uses bridge type flags for optimization: Y
  EVPN supported : Y
  PBB-EVPN supported : Y
  Optimized MAC Address Withdrawal supported: Y
  Storm-control rate unit kbps supported: Y
  Storm-control rate for pseudowires supported: Y [DEFAULT]
  Storm-control minimum rate unit kbps : 0 [DEFAULT]
  Storm-control minimum rate unit pps : 0 [DEFAULT]
  PWHE sub-interface supported: Y
  Forward-class supported: Y
  Route-Policy supported: Y
  BVI with PWHE subinterface supported: Y
  Max FXC Per System: 0 [DEFAULT]
  Max AC Per FXC: 0 [DEFAULT]
  Label block size for EVPN: 0
  Static MACs are supported: Y [DEFAULT]
  EMA MACs are supported: Y [DEFAULT]
  EVPN evi stats are supported: N [DEFAULT]
  EVPN control plane only supported : N [DEFAULT]
  BVI Delayed Replication : N [DEFAULT]
Node 0/0/CPU0 capability:
  VPLS Max MAC addresses per port: 2097152
  VPLS Max MAC addresses per bridge-domain: 2097152
  VPLS Max MAC addresses: 2097152
  VPLS Max bridge-domains: 65536
  VPLS Max attachment circuits: 16384
  VPLS Max pseudowires: 131072
  VPLS Bridge-port MAC limit supported: Y
  VPLS MAC limit action supported: Y
  VPLS Disable flooding per port supported: Y
  VPLS AC type mix per bridge-domain supported: Y
  Edge-core role supported: Y
  VPLS Max attachment circuits per bridge-domain: 16384
  VPLS Max split-horizon groups per bridge-domain: 2
  VPWS Max attachment circuits: 16384
  VPWS Max pseudowires: 131072
  RSI bits: 0x1
  Max bundle attachment circuits: 131072
  VPLS Max virtual forwarding interfaces: 65536
  VPLS Max pseudowires per bridge-domain: 512
  Max global xconnect id: 262144
  Max BVI interfaces: 4000
  Max i-SID: 65536
  Max PBB edge BD: 65536
  Max PBB core BD: 65536
  Max EVPN BD: 1024 [DEFAULT]
  Max DHCP bindings: 131072
  IPv6 Pseudowires supported: Y
  Max PWHE main interface: 1792
  PW Grouping supoorted: N [DEFAULT]
Node 0/7/CPU0 capability:
  VPLS Max MAC addresses per port: 2097152
  VPLS Max MAC addresses per bridge-domain: 2097152
  VPLS Max MAC addresses: 2097152
  VPLS Max bridge-domains: 65536
  VPLS Max attachment circuits: 16384
  VPLS Max pseudowires: 131072
  VPLS Bridge-port MAC limit supported: Y
  VPLS MAC limit action supported: Y
  VPLS Disable flooding per port supported: Y
  VPLS AC type mix per bridge-domain supported: Y
  Edge-core role supported: Y
  VPLS Max attachment circuits per bridge-domain: 16384
  VPLS Max split-horizon groups per bridge-domain: 2
  VPWS Max attachment circuits: 16384
  VPWS Max pseudowires: 131072
  RSI bits: 0x25
  Max bundle attachment circuits: 131072
  VPLS Max virtual forwarding interfaces: 65536
  VPLS Max pseudowires per bridge-domain: 512
  Max global xconnect id: 262144
  Max BVI interfaces: 4000
  Max i-SID: 65536
  Max PBB edge BD: 65536
  Max PBB core BD: 65536
  Max EVPN BD: 1024 [DEFAULT]
  Max DHCP bindings: 131072
  IPv6 Pseudowires supported: Y
  Max PWHE main interface: 1792
  PW Grouping supoorted: N [DEFAULT]

 

adam

 

netconsultings.com

::carrier-class solutions for the telecommunications industry::

 

adam

Which XR release are you running?

 

The reply I posted yesterday was from 6.3.1. 

 

This is from an asr9001 running 6.4.2:

 

RP/0/RSP0/CPU0:our9001#sh platform
Tue Sep 4 11:39:52.886 CEST
Node Type State Config State
-----------------------------------------------------------------------------
0/RSP0/CPU0 ASR9001-RP(Active) IOS XR RUN PWR,NSHUT,MON
0/0/CPU0 ASR9001-LC IOS XR RUN PWR,NSHUT,MON
0/0/1 A9K-MPA-20X1GE OK PWR,NSHUT,MON
RP/0/RSP0/CPU0:our9001#sh l2vpn capability | i Max BVI
Tue Sep 4 11:39:58.573 CEST
Max BVI interface supported : 16000
Max BVI interfaces: 16000
RP/0/RSP0/CPU0:our9001#sh install active summary
Tue Sep 4 11:40:04.052 CEST
Default Profile:
SDRs:
Owner
Active Packages:
disk0:asr9k-bng-px-6.4.2
disk0:asr9k-doc-px-6.4.2
disk0:asr9k-fpd-px-6.4.2
disk0:asr9k-k9sec-px-6.4.2
disk0:asr9k-li-px-6.4.2
disk0:asr9k-mcast-px-6.4.2
disk0:asr9k-mgbl-px-6.4.2
disk0:asr9k-mini-px-6.4.2
disk0:asr9k-mpls-px-6.4.2
disk0:asr9k-optic-px-6.4.2
disk0:asr9k-services-px-6.4.2

RP/0/RSP0/CPU0:our9001#sh l2vpn capability | i Max BVI
Tue Sep 4 11:40:11.421 CEST
Max BVI interface supported : 16000
Max BVI interfaces: 16000
RP/0/RSP0/CPU0:our9001#

 

/Aleksandar

Aleksandar Vidakovic
Cisco Employee
Cisco Employee

You can find that info in the output of "show l2vpn capability" command. I'm attaching the output from an asr9k running a 6.3.x release.

 

/Aleksandar