cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1111
Views
0
Helpful
4
Replies
Anuj Singhi
Beginner

OSPF Redistribution limit in XR Platform

Hi Team,

 

I am getting below error log in my ASR9K for ospf stating that the limit for redistribution has been reached

 

ospf[1021]: %ROUTING-OSPF-4-REDIST_MAX_PFX : Redistribution prefix limit has been reached - 10240 prefixes 

 

Can somebody help me to identify if its a bug or a known error which can be rectified?

 

Regards,

Anuj

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Elvin Arias Soto
Cisco Employee

Hi Anuj Singhi,

There is an OSPF maximum redistributed-prefix set by default as warning-only. Is just an informational message to indicate that default threshold has been reached. Warning threshold is set to 75% by default.

Refer to, https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-4/routing/command/reference/b-routing-cr-asr9000-64x/b-routing-cr-asr9000-64x_chapter_0110.html#ref_2015871.

Regards,

Elvin

View solution in original post

4 REPLIES 4
mivens
Beginner

Check your configuration. You probably have

maximum redistributed-prefix 10240

set.

No I don't have it any config statement like that.

Hi Anuj,

 

can we check how many routes are present?

please provide "show route summary"

Elvin Arias Soto
Cisco Employee

Hi Anuj Singhi,

There is an OSPF maximum redistributed-prefix set by default as warning-only. Is just an informational message to indicate that default threshold has been reached. Warning threshold is set to 75% by default.

Refer to, https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-4/routing/command/reference/b-routing-cr-asr9000-64x/b-routing-cr-asr9000-64x_chapter_0110.html#ref_2015871.

Regards,

Elvin

View solution in original post

Content for Community-Ad