cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
203
Views
0
Helpful
0
Replies

PW-ether on XRv

valdimargth
Level 1
Level 1

Hi all,

I´m trying to set up in a lab enviroment in eve-ng, xr router and we have installed ios-xr 7.2.2 xrv9k image because we need to test few things including L2VPN and pw-ether termination but I can´t figure out for the life of me how I activate or if I need to add some rpm´s to the router but during the first boot I noticed he installed few repositories and I belive those are all that are available for this router.

Those are what he installed:
xrv9k-mpls-2.1.0.0-r772.x86_64
xrv9k-mgbl-3.0.0.0-r772.x86_64
xrv9k-eigrp-1.0.0.0-r772.x86_64
xrv9k-ospf-2.0.0.0-r772.x86_64
xrv9k-xr-7.7.2
xrv9k-mpls-te-rsvp-3.1.0.0-r772.x86_64
xrv9k-isis-2.1.0.0-r772.x86_64
xrv9k-m2m-2.0.0.0-r772.x86_64
xrv9k-mcast-3.0.0.0-r772.x86_64
xrv9k-bng-1.0.0.0-r772.x86_64

I read that L2VPN VPWS was Introduced in 6.4.1 and I´m able to setup L2vpn with out issues and traffic flows normally but BVI and PW-ether I´m not able to use.

So my question is: Am I wrong with assuming this works with the L2vpn package and this is not supported/not implemented in XRv 9k or am I missing something?

Regards.

0 Replies 0