09-08-2015 08:07 PM
I would like to know what is the IOS XR command? for:
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps envmon fan shutdown supply temperature status
Thank you very much.
09-09-2015 01:08 AM
Is this correct?
Command in IOS | XR command | Remark |
snmp-server community abc RO | snmp-server community abc RO |
|
snmp-server trap-source Loopback0 | snmp-server trap-source Loopback0 |
|
snmp-server source-interface informs Loopback0 | - | Using snmp inform on IOS-XR |
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart | snmp-server traps snmp |
|
snmp-server enable traps envmon fan shutdown supply temperature status | snmp-server traps fru-ctrl |
|
snmp-server host 11.10.100.121 version 2c abc | snmp-server host 11.10.100.121 traps version 2c abc |
|
09-09-2015 01:29 AM
most of it is correct. To understand what kind of notification is triggered with the "fru-ctrl" trap please refer to Table 3-2 of:
http://www.cisco.com/c/en/us/td/docs/routers/asr9000/mib/guide/asr9kmib/asr9kmib3.html
I suppose you want to use "snmp-server traps sensor" along with "fru-ctrl". The "snmp-server traps sensor" triggers the entSensorThresholdNotification.
Regards,
Aleksandar
09-25-2015 02:22 AM
I can’t configure these commands on CRS-1 XR version 3.6.3. How should I do?
snmp-server traps snmp linkup
snmp-server traps snmp linkdown
snmp-server traps snmp coldstart
snmp-server traps snmp warmstart
Thank you very much.
09-25-2015 04:57 PM
For the CRS platform, support for these options was added into Release 3.9.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide