ā04-07-2016 07:37 AM
I am getting this log over and over again on one of our 9001 and I am not sure what it means. I can't seem to find any information about it. So far the router's service has not been impacted.
RP/0/RSP0/CPU0:2016 Apr 7 09:19:22.975 UTC: envmon[210]: %PLATFORM-ENVMON-3-OPERATION_FAIL : Failed in envmon_cpm_rev_hdlr.2136, error code Invalid argument
ā04-07-2016 08:53 AM
Hi Evan,
What version of code are you on?
Do you happen to have any other error messages?
Are you using any satellite boxes? If so what type?
I would recommend checking show environment on the 9K and from the satellite checking show satellite environment to see if anything seems odd.
Thanks,
Sam
ā04-07-2016 09:08 AM
Hi Sam
We are on 5.2.2
There is also another alarm:
RP/0/RSP0/CPU0:2016 Apr 7 09:23:00.975 UTC: envmon[210]: %PLATFORM-ENVMON-4-SAT_DOM_SENSOR_ALARM : [Satellite 200]: ALARM_HIGH alarm occurred for DOM sensor type TEMPERATURE and port number 8
We have two NV Satellites, (9000v) & "sh nv satellite status" seems to indicate they are both up and "stable."
Thanks
ā05-12-2016 05:04 AM
Also seeing the same error running 5.1.2 with 2x 901 nV satellites.
Only seeing this on boxes with satellites connected so assuming it's this.
ā04-11-2018 11:29 PM
Hi Team
Any news regarding this issue seeing the same on a satellite NCS 5002 over and over again
ā04-12-2018 10:14 AM
The environmental monitoring apparently can't read data from one of the sensors. If reported only during boot-up, this can be safely ignored. If reported consistently, the outputs of "admin show environment all", "admin show logging onboard temperature" and/or "admin show logging onboard voltage" could help. If this is observed with a recent IOS XR release, it would be the best if you would open a TAC SR because I couldn't find recent known bugs with this symptom.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide