Hello Team,I have a consumer EPG in the common Tenant and other provider EPGs in user Tenants. when applying service graph PBR between them should i configure the service graph in Common (where consumer reside) or in the User Tenant.I checked documen...
Forum Posts
We'd like to upgrade our ACI fabric from 4.2(6d) towards 5.2(3e). The plan is to upgrade the APIC controllers very soon, but only upgrading the leaf/spines after New Year. Is it an issue to upgrade the APIC controllers first and the leaf/spines more ...
Hello Team, I'm trying to configure Microsegmentation for physical Domain EPG (IP attribute, which is supported according to doc), but, it's not working as expected. note: leaf is 2nd gen (-EX model)Any idea, please.Thanks
Hi Experts, I'm working to automate infrastructure deployment using Ansible and would like to implement the following: There is an ACI fabric containing 5 APICs. I have a script that knows how to connect to an APIC and send some configuration request...
Hello! I have installed the Cisco ACI simulator on an ESXi host in our datacenter in order to learn about ACI. I've provisioned a seperate VLAN and subnet for the purposes of this deployment. Deploying the OVA went without a hitch, and I passed throu...
Hi Our security team is asking if it's possible to deploy a NDR solution in our datacenter fabric to ingest "all traffic" for analysis. All they're asking is to SPAN all traffic on each Leaf switch into the NDR device. I've made it clear that they ca...
Hey folks!I think I got this wrong, when I read through the Documentation I thought that you can always login using the fallback domain.I have a local admin user configed for the ACI Fabric and had the impression that I can always login with User api...
hi, I'm new to operating CISCO APIC, a question is that, is there anyway to collect top10 or top 5 traffic usage endpoints from one interface of a leaf switch ? like API or Zabbix SNMP?
Hello Team,I'm configuring EPG with VMM Domain association to AVE Domain with the native mode selected.The port-group is pushed to vcenter VDS with a Vlan taken from the Vlan Pool (Dynamic, external block) but the VLAN is not added to active VLANs un...
Hi.. I installed aci simulator (4.26o) on vm. Then, I upload aci app (Citrix_ADCManager) by apic gui. However the installation failed... like below Could I test ACI app (stateful or stateless) by aci simulator? is it possible?
Hi Team , logs for the EP attaching and detaching to and from the Fabric shows IP as 0.0.0.0( as shown in the screenshot below ) . Can someone please explain why does it shows as 0.0.0.0 and does it indicate any issue . I am able to ping the server...
Hey all, Regarding the ACI MSO/APIC, Knowing that RTT between 2 MSOs = 150 msec and RTT between MSO/APIC = 1msec. What is the behavior of the MSOs and APICs when RTT is not met?Does it have any influence on the control plane of the fabrics? Thank you...
For the record, the client I am at has no monitoring of links / infrastructure at the moment. I am trying to find the bottleneck for a bandwidth issue. Replication across the IPN (Multi-Pod), does not go as high as it should (results +- 100M). Smalle...
Hi, In APIC -> Access Policies, there are two thing that I don't see the different between them ( Physical domains and External bridge domains).What is the purpose & differences of each one, what is the equal configure in IOS for them ?
Hello Team, I need to connect Leaf 9396PX to Vxrail nodes, and MLD is required. I want to confirm if MLD is supported on the N9396PX model or not? Thnx
