Hi, I am new to ACI, and currently trying to figure out how best to achieve my goals in terms of the high-level constructs, and could do with some advice/guidance. I have been reading numerous guides, but am still a little unsure whether what I am ho...
Forum Posts
Resolved! APIC-Server-L3 Rail Kit
Do you guys know the model Rail part that the APIC-Server-L3 uses?We need to get one but not sure which one is right to use
Resolved! L3Out encap with sub-interface
Hi! I see in the documentation that when we have 1 L3out with 2 nodes with each an SVI connected to a different router, a shared BD is created between the nodes (https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/applicatio...
Hello, We are trying to get our contracts between EPGs to log the deny and permit traffic as seen within the Tenant > $tenant > Operational > Packets > L3 Permits/L3 Denys. According to the obscure documentation it seems that one of the key things th...
Ok, I have read over the documentation multiple times on service insertion and I cant seem to find a good explanation for the internal packet flow with an ACI service insertion with a L2/transparent firewall. So, specifically, Im looking the solution...
We have placed an order for some ACI equipment (APIC cluster, spine switches, and leaf switches), however the lead-time for the spine switches is significantly longer than we were anticipating.Could anyone confirm whether it will be possible (and rea...
Hello,I am very new to automation and have been trying to use the Python SDK for ACI (acitoolkit) for creating specific vlan into a pre-existing vlan pool. I looked at the learning labs and saw that there are functions in the acitoolkit that are bein...
Hi ACI professionals,I want to disable the Intersight Device Connector using the REST API.Unfortunately I have no idea what the correct object is. The API inspector does not show any changes when changing the Intersight preferences over the GUI. Furt...
I have connected the VMware on one of the leaf switches let say switch 6. I can see the endpoint mac address on leaf 6 from one of the physical ports but I don't see the mac address of that endpoint on leaf1 which is a border leaf connecting L2 exter...
Hi Community, An aci leaf appeared as inactive in fabric membership and unrechable from apic side. Actually, i can ping other leaves, spines and all apics but in leaf side i typed "moquery -c faultInfo" i got this message : Can someone help me to re...
The Cisco ACI is the unifying point for automation, management, monitoring, and programmability for the Cisco ACI fabric. The Cisco ACI Simulator is a virtual appliance that provides a simulated Cisco ACI environment. Cisco ACI Simulator provides cen...
Hi , We want to downgrade our leaf switch before register to fabric. However, our target firmware is 12.2.(2k) which is removed from software.cisco website. That's why we want to download this firmware from apic controller firmware repository. We co...
Resolved! Right way to delete objects in ACI
HI ACI pro's,According to the REST API guide, there are two ways to delete an object in ACI:- HTTP DELETE operation (no examples given)- HTTP POST operation, referencing the object DN with the attribute "status":"deleted" What is the most common and ...
"Microsoft introduced in Windows Server 2012 was NIC teaming. This feature allowed multiple physical network interface cards, or NICs, to be bound together into a single logical NIC. Even though NIC teaming wasn't a Hyper-V feature per se, it worked ...
Hello aci colleges, we found strange behavior on aci. After removing some interface from static bindings(paths) cisco aci doesn't clear endpoints learned from this interface. On the leafs mac address still exist pointing to the removed interface So...
