We connected an ASR directly to a Cisco Leaf. We are experiencing intermittent slowness with traffic going through the ASR. Should we change the MTU size on the ASR to 9000? Currently, the ASR is at default of 1500 and the Leaf port is at default of ...
Forum Posts
Hi Can any one break my doubt? In non ACI DC network( VXLAN, BGP EVPN) the BGP EVPN take care the control plane for L2 and L3 forwarding but in ACI Network who take care the control plane like EVPN? As far I know ISIS take care underlay then Who ta...
Resolved! APIC install via KVM
Hello All, I attempted reinstalling installing APIC via KVM on the APIC-M1 server according to the documentation link below. It seems to be stuck here now for about 3hrs with no progress. Any idea what could be wrong? it is stuck at "Started Service ...
Hello,We are using APIC 5.2(4e). We would like to add EPG static ports using cli. Does APIC cli save automatically?Thanks, Samantha
I am looking for a model number of a hybrid copper/fiber switch that will operate in elevated temperatures. The use is for remote cameras and IP phones over 100 meters away in a manufacturing environment, with no remote IDF room. A Hoffman rack is in...
Hello all,I inherited an ACI fabric that is running 4.0(2c) (and yes I am planning an upgrade to 5.2 as 4.0 is EOL). I'm trying to figure out where all the leafs are in the datacenter without having to look in every rack.The 14 Leafs that are already...
Resolved! LACP Lag Policy for VMM
Hello, We're getting the below major warning when setting up VMM integration. We using vmware DVS 7.0.3.
Hello, I encountered a problem when I started registering node members - I can register one and then no other node is pending registration, and I know for a fact the leafs are connected beacause when I remove the registered node I see in the pending ...
Hello, I am trying to right a script to configure a pair of leaves that will be used as a vpc pair. I would like to be able to create the switch profiles in a single API call (L105, L106, L105-L106). However, I can't seem to get it to configure...
Good Morning !! I´m going to connect ACI fabric to legacy N9K with VPC for extend L2 between them. I would like to know if there are some best practices to configure it. For example, STP configuration mode in N9K side.....lacp fast rate....etc... Cou...
Hello,We have 3 x APIC setup and all the APICs have same SNMP settings and these are done under Fabric > Fabric Policies > Policies > Pod > SNMPWe are able to discover 2 x APICs in Solarwinds but the 3rd APIC is failing to discover. Its a cluster of ...
Hi When I was investigating the storage capacity of APIC, I found that the storage is being on increase in the capacity of /data/log/.Currently, the GUI displays 53%, but I'm afraid that something problem could affect the system because of the storag...
Hi Guys,i am preparing Cisco ACI and VxLAN in ACI. I am having query for difference between Legacy Nexus VxLAN and ACI VxLAN? Can anyone give best answer?
We've setup a VMM domain in our ACI environment according to the attached diagram. We have 2 links going into leaf161/171 (Phy Dom AAEP) and we have 2 links going to leaf163/173 (VMM Dom AAEP). Leaf161/171 are static ports for vmotion, storage, iscsi...
Resolved! Infra VLAN Question
Hi Team, I have confuse about infra VLAN, Cisco recommend use 3967 or any vlan which no existing/overlap other platfrom.My Question is: if I use vlan 3979 or any vlan id higher 3967, is it possible ? (I think it's silly question) but if it's impossi...
