Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My new WAVE-594 has software version 5.1.1-npe, but my Central Manager only supports up to 4.5.1. So I cannot join the Central Manager to force the software change. What is the procedure for downgrading the WAVE-594 software to 4.5.1 or earlie...
This is what I want to achieve USING the ACE as a reverse proxy.User uses the url https://abc/password - gets to the destination server & the web pageIf user tries to use any thing additional then the connection is dropped at the ACE such ashttps://a...
I have been trying to setup WAN Optimization between two of my sites over a DMVPN Tunnel. I have a Cisco 2811 at one site and an ASR1001 at the other. The problem that i run into is that the host or hosts i specify in the ACL (to participate in the W...
We recently experienced an issue with our WAE-7341 where the fail-to-wire mechanism didn't perform as expected, which has generated a couple of questions. I already have a TAC case open, but our engineer has left on vacation and we probably won't see...
Hi AllI have an issue with LMS not terminating SSH sessions on the Cisco ACE, I have posted on the network management forum as I had thought maybe they would have seen this issue. Link to other post: https://supportforums.cisco.com/thread/2210739?tst...
Hi,is there a possibility to get a load balancing across two rservers so:when client sends http://vip/ and it goes to rserver1 then url is sent without changewhen client sends http://vip/ and it goes to rserver2 then url is modified to http://vip/xyz...
4756640951-MMPHTN-ATT-WAAS#sh disk detailRAID Physical disk information: disk00: Defunct-PFA 3QP2BAZH 0 MB Warning: Hard Disk is expected to fail. Please replace the disk. disk01: Defunct 3SJ13EGW 0 MB di...
Hi,We have got a new WAAS setup as a Central Manager. It is not configured redundantly as yet and still in the process of bring the device fully. We have network connectivity and can SSH to the device but I am not able to access the GUI on port 8443....
I have Cisco 6500 with FWSM and ACE module which are in one central DC. Also we have four different Datacenter (Hub & spoke) and in our FWSM we have configured four contexts in central DC FWSM for each DC. Each DC servers are different VLAN and IP su...
We've got an application that broke after upgrading our ACEs from A5(2.1) to A5(2.2); the problem lies in how the ACE handles URLs with embedded backslash characters in them - e.g.:https://servicename.umich.edu/give/page.aspx?pid=371&s-Tags\Value=xPr...
We are seeing a very peicular problem with our CSM. Selective clients behind our CSM are unable to ping other clients on other subnets. There is no ryhme or reason to any of the ICMP blocks. For instance you can not narrow the problem down a certa...
Hi,I try to make session-reuse working on an ACE-4710 Version A5(1.0) without success. Actually, I am facing the problem of the high number of backend HTTP connections that must pass through a firewall. I want to reduce this amount of open sessions w...
Hello,I am considering using IP sticky timeout, but have a quick question about the database, is the 800,000 sticky connection per appliance or per context?Thanks,Dave
