Application Networking

hi ,  please  i have WAVE 594-k9 diplays the following ouput after reload then i dont have acces to maange it  Wait for BMC ...Wait for BMC 10 secondsWait for BMC 10 secondsWait for BMC 10 secondsWait for BMC 10 secondsWait for BMC initial Successf...

Customer is receiving the following: Alarm ID Module/Submodule Instance--------------- -------------------- ---------------1 missing_assignment WCCP/svc0612 missing_assignment WCCP/svc062 I found the following forum post which was very informative:...

Hello,I am supporting an environment that has 30+ remote WAEs deployed with a CM at the HQ.All remote WAE's Versions = Cisco Wide Area Application Services (universal-k9) Software Release 4.2.3b (build b4 Oct  4 2010)HQ's CM version = Cisco Wide Area...

When I connect the blade WS-CBS3012-IBM-I  with version 12.2(52)SE (CBS31X0-UNIVERSAL-M) against a Nexus 5596UP(n5000-uk9.5.0.3.N2.1)  with GLC-T interface I have packet loss and CRC on the blade. The amount of CRC and input errors are identical. The...

Hi Forumers'It seem that ACE10 not support 12.2(33)SXJ1 IOS running on C6500. The box cannot detect the ACE module when power up. Currently the ACE10 running on system A2(30). My challenge i have the ASA SM that compulsary to run on 12.2 (33) SXJ1 ve...

Hello Team, as i learned from this document: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/release/notes/70351_nxos_rn.pdf#%5B%7B%22num%22%3A49%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C48%2C378%2C0%5D Q-in-VNI ...

On the Nexus 5600 with version 7.3, Required license for ITD is a  N56-SERVICES1K9. But I had to enable feature PBR for ITD working. Enabling feature PBR requires another license LAN_ENTERPRISE_SERVICES_PKG. But I don't have that license so it is in ...

Hi there,I am looking for any documentation that formally addresses the hardening best practices or recommendations specific to ACE configuration.  There is plenty of Cisco IOS stuff out there but I would like to know if anyone has anything on the AC...

Hi all, We have experienced an issue after fresh installing DCNM 10.1 on a VM on our DC. We wanted to install DCNM 10.1 on a Microsoft Windows Server 2008 R2 (64-bit) using the default parameters, but when trying to install PostgresSQL 9.4 we receiv...

Hi, I'm trying to convert from Telnet to SSH only. Viewing other posts on NetPro, I'm not really sure if I need to upgrade my License or not. As my show sshd commands are showing output to reflect some sort SSH config. What am I missing here ??CSS115...

Hello, I have an AppNav cluster that contains 2 ASR routers and 3 WAAS: 2 physical WAAS with 6k license, 1 vWAAS with 50k license. The load distribution does not seem to work: as the 6k get filled up, the 50k never gets to optimize more than 6000 s...

Hi, I´m having issues with a Nexus 5k , We have a pair of 5k with dual-home fex scenario. The issue comes after manually shutdown one vlan (it´s configured with HSRP) the host in the fexes loose connection to host across the network, we have OSPF as...

Hello,  The topology is as below. siteA ---<IPsec VPN>--- siteB---<MPLS>-----siteC siteA and siteB need to download large files from file server located in siteC. There is a WAE located in siteC. To optimizing the downloading, I put another WAE in ...

Hi Putting this on the side of the building, what would be the range of access out in the parking lot.  Approxily how many feet with clear line of sight. Thanks