Application Networking

I have a problem setting up RDP loadbalancing.My setup is a WS-C6509-E with IOS 12.2(33)SXI5 and a ACE20-MOD-K9 runningA2(3.3).I have the ACE in two-arm-mode, I can connect to the real servers via RDP. Thereal servers use a MS Terminal Server Session...

After backing up a blade I went into the CM, edit Device, Admin, Virtualization, Actions, Start Blade.  It is up and running, I can ping it, but I cannot RDP to the server to verify that it is backup.  It seems like the server is shut down still.  Wh...

We are running Citrix over our MPLS, is there any way to accelerate ICA?  I was told the only way to do this is using SSL over a WAN..  No acceleration over an mpls? 

Hello Dears,I'm trying to implement Cache loadbalancing through Cisco ACE Module.I have 2 Bluecoat cache proxies, when i do configure transparent proxy without spoofing client IP, everything work properly, but when I enable spoofing client IP (reflec...

Goodday,I have a small issue here i have followed all the instruction on recovery the system software on cisco WAAS on NME.I constanly get this error.Where am i missing it. I have done this before but i cant remember were am dropping it.Here is the c...

Hi,I need to do url redirection. I've worked on CSS alot so far but I'm new bie to ACE.for example - my CSS config for url rediction is as follow:service server1:443   ip address 192.168.1.1  protocol tcp   port 443   keepalive type ssl   activeservi...

I'm using an ACE 4710 in a new datacenter, with the following setup:2/4 physical ethernet interfaces port channeled into port-channel 12/4 physical ethernet interfaces port channeled into port-channel 2I have the following vlans defined:1001 - admin ...

We need to have our ACE look at our two servers, and based on the text it sees on a predetermined page, take an action.Example 1: ACE looks at web page on server1, and sees "maintenance". Desired action - send all users to server2, & wait for server1...

Can some one help me to identify the mobile browser and PC browser. Which field in headercontains this information.

Hello All,I have some questions regarding ACE and DDos attacks:- Can I use ACE as a secondary defence line (after our FW and DDos protection in our ISP)?- Do you guys can point me to some documents and descriptions aboute signatures that I can config...

Hi,I'm new to ACE and this is kind of confusing compare to CSS.I'm configuring stickyness for two servers and load balancing ports 80 and 11230. I need to configure stickyness for port 80 while no stickyness for port 11230.so on CSS, config would loo...

i have a new customer moving into my multi-tenant DC.the customer will have its own VRF but still wants further isolation within this VRF.they've got prod,dev and staging networks and will like to keep traffic strictly restricted within these areas.t...