Hi ,After we upgrade WAAS we have the output of show hard disk details:Disk00 : Not Used (*)Disk01 : Not present or Not respondingAppreciate Assistance.
Hi, I'm trying to setup a preposition for a huge content (50 GB) but it doesn't work. CM says process is in progress, but nothing happens in the core WAE (not even in the Edge WAE).Background:CM version 4.3.1Core WAE: 4.1.7, License Status: Enterpris...
OK, I've got a problem that I can't figure out.Trying to make sure that NSForwarding works on the GSS before putting these into production (4492R's). For whatever reason, A record lookups via the forwarding DNS server work, but anything else (most i...
While troublesehooting an issue yesterday I noticed that the MAC address of the VIP I was tracing happened tobe flush throughout the data center. Turns out that the VIP on this loadbalancer has the same MAC as the VIPs on all of the other load balan...
I have a VIP built to load balance traffic to 2 SAP servers hosting the InfoViewApp. The VIP is functioning just fine, and balances traffic without a problem, but single-sign-on is not working. When a user points his/her browser to the server directl...
Hello,I had the RDP working fine with the version A2(3.1) with redundant ACE Modules.After an Upgarde to A2(3.2) all the existing RDP sessions were still working, but the ACE did not redirect any new RDP sessions. Instead other applications as HTTP a...
Hello expert,I have a problem when i tried to install software... i checked the cisco.com "http://www.cisco.com/en/US/partner/docs/routers/access/interfaces/software/feature/guide/ism-sm-sre.html#wp1119304"you can see the command&error at the below.#...
Our WAE/WAVEs in the field are configured for TACACS Autherntication. During harddisk failures we could not access the devices. The ACS logs a invalid TACACS secret. In running-config the "tacacs key ****" statement is missing. The statement still c...
Hi, I am trying to setup a simple html website to take a rserver in and out of service using the built in ACE module xml api. What would be the html code to post the xml command using a button? Currently I receive <error err_num='103' err_str='XML_E...
Hi there,Is ther anyway to reset/change/view the initial password created for the WEB admin ( access via the gui) during the setup steps?I can not find any info/docs regarding this.thanksManuel
HiAfter upgrade few WAEs I've this alarm on two devices:The Flow Monitor control connection to the tcpstat-v1 console could not be (re)established after multiple attempts. The rest upgraded devices don't have this alarm.Do somebody know where I shou...
All,need help in troubleshooting why my ace is not responding to snmp queries. switch is repossing fine to snmp queries, but my ace module is not responding to the same. I see snmp hits are increasing fine.sys contact: sys location:227577 SNMP packet...
I am using MS ias with my routers and switches for aaa login auth. But I cannot get it work wit waas system I have. IAS say ok to waas, but ... I caanot get through. Does anybody know how to configure IAS for waas AAA to works?thanks
Hi all, I have a pair of redundant Cisco 4710 ACE loadbalancer for performing L4 connection load balancing with 2 servers. It worked fine and the connection got load-balanced well in round-robin pattern, but after rebooting one of the server, I see t...
Hi All,I'm having an intermittent issue showing up in an ACE implementation for the Company's ERP system. I've setup the ACE to loadbalance across 40 virtual servers (10 each are on 4 physical servers). They are web servers. The logical look of it...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
