Application Networking

Hi All ! What will be exact Layer 7 URL matching policy command for below CSS configuration .owner PRO  content proservers     add service proweb2     vip address x.x.x.x1     add service proweb3     balance leastconn     protocol tcp     port 80    ...

Hi, assume we have a serverfarm with three realservers. But one of them is very slow, and therefore it should only get active when “both” other two servers fail. I have found the following options, and would like to ask you to confirm if these confi...

Hi,I'm using version 4.1.3I tried to implement the authentication and authorization on the WAE CLI using a FreeRADIUS.But, I'm not able to manage authorization.I tried cisco-avpair = "shell:priv-lvl=15" but it doesn't work that way.Where could I find...

Does anyone happens to know if Cisco is offering the ACE certification?Thanks.

CSS 11506Is it possible to pass Client's IP addressto the Backend servers in One arm config.It is so that we can get stats on Web ServerThanks in advance

Guys,We are testing the ANM 4.1 with our ACE modules in the 6500. it works very nicely.when i work in CLI and we test our load balnacing rules, i heavily use the "show service-policy url-summary"this way i cant rack if the rules i am making actually ...

HelloDoes anybody install the VeriSign Extended Validation certificate in the Cisco SSLM module? I had some issues with it. Below I am attaching the VeriSign's knowledgebase regarding such installation on Apache server https://knowledge.verisign.com...

HelloJust came across a problem we are facing and thought to share it.wondering about the feasibility on the CSM to forward HTTP requests to a "Service not available" web page (which could be available on a web server located on the same server(s), i...

Hi all,We are looking to do PC builds over the WAN, so in preparation we have pre-positioned the relevant 'build' files from the remote servers. However when we kick off a PC build, the PC is still downloading/running the files from the central serve...

Not sure how to put this, but the Q is what recomondations you would give regarding design configuration using 2 ACE modules in 2 different 6509's.Some background info:The 6509's is used as core, and configured with bgp, ospf, vrf and hsrp.  The VLAN...

Hey guys,Don't know if I'm in the right place but I'm looking for help on configuring vPC on a 6500 cat. Thanks in advance.BR