Application Networking

Hi, i have 2 WAE network modules on my 3800 ISR Routers.if i don't need the GUI for statistics, can i configure a working setup without central manager entity ?, can i do all the configuration directly on each WAE network module and still get all the...

Hi,I'm currently studying existing ways of interacting whith CISCO ACE module in order to send configuration scripts automatically from a web page for example.So, I'd like to know which means you know to do that. It seems that I can do that whith XML...

I am a Cisco WAASFE certified sometimes last year with bit of experience in design and deployment. yesterday i got a client wanting to use Riverbed and this was my first time to hear about it. Going to the website, i got alot of sturf that Riverbed i...

Hello,I'm changing our LB from CSS11500 to ACE 4710. I use the converting tool but I know it's not perfect. I got the config for actual server side but I'm still not clear with interface (alias, peer IP and FT interface). Can you take a look and let ...

How would we determine when the startup config was last written to on the ACE SM running A2(1.5a)?Thanks..

Is there a queuing manger for CIsco GSS (similar to CSM andfirewallsessentially what i am looking for is a way to use the cisco GUI to generate configs and queue it up somehere and then  push it  out once a day with all the changes ( I am looking to ...

Hi,This is regarding the ace-TFTP server load balancing, the ace will load balance on port 69.We have tried to do the same, its seems to the ACE getting the TFTP request but not able to reply back to the client, also we are also probing the same on p...

Hi,I need to deploy waas  WAE7371 in VRF/MPLS environment. I have 2 sites, each one have 6500 router as  a CE\PE with multiple vrf. the wan interface is mpls enabled. i need to deploy the WAE-7371 in only one VRF, let say VRF  netapp which is bounded...

Hi,Any resond why Classifier Unix-Remote-Execution is not been optimized as default?We need to use Unix-Remote-Execution in our ERP system BAAN.Jan Rockstedt

HI All,We were doing upgrade of WAE OS to 4.1.5f. All the WAE's has a OOBD connection. After we execute reload from CMS the WAAS goes into hang mode. When we see from the console of the WAE the box is in hung state  as below[WAAS boot - enter bootfla...

Hi all,i want to configure wccp between the WAE and 2 X C6K (IOS - SXF16) routers. i want to use the "negotiated return" method.i understand that i need to use the command: egress-method negotiated-return intercept-method wccp on the WAE.do i need to...

Hi,i have a Problem with the Time in alle default Reports on the Central Manager.The time from alle Reports is wrong.The time on all WAE Device are right. I can make a show clock. So i get the right time.Can I Change the Default Time in all Reports f...