Application Networking

Does anybody happen to know what the max number of concurrent connections per context on the ACE SM?Thanks..

hellohow to get URL www.xyz.com to be accessed by allandwww.xyz.com/abc allowed only to a certain subnet - say 10.1.100.0/24mind you 10.1.100.0 should also access www.xyz.comwe have many exisitng URLs allowed to everybodye.g www.xyz.com/pwcbelow is s...

We have a CSS laadbalancer connecting to a couple of ldap servers. The ldap look up takes longer than usual and there is pooling set up on the ldapserver. The issue is the css does not send a FIN ad as a result the session stays open on the ldap but ...

HiI have few WAE 512 installed in my network. Every use 4.1.5b software. I have problem with one. I have upgraded it from CD and after that I see below alarms:Directy after WAE restart appear:Major: DRE (DRE+LZ) initialization failed: <>after about 1...

If I create a custom admin role, even though role shows a rule permitting changeto, I can't actually use changeto context command. Only works with default roles. Is this as expected behaviour for custom roles. even if same custom role is creaetd in e...

Hi;I am runnig CSM ver 4.3(4) latest CSM Software on WS-C6513 , IOS  (12.2(18)SXF8) I had Configured CSM as below:vlan 170 client  // Routed VLAN  description *** CSM Client VLAN ***  ip address  172.30.170.8 255.255.255.0  gateway 172.30.170.1! vlan...

Hi Guys,What is ideal solution for monitoring Humidity and Temperature in a data Center. Pls help!

When I do the initial FT configuration, is the priority the factor that determines which ACE module is the active and which is the stand-by?Thanks..

So, I have a WAE-512 with a system error led that will not clear, and is being replaced by TAC. The engineer also mentioned that he would send a new hard drive since the counters are right at the end of recommended life. Is this something that anyone...

Hi,I am configuring SNMP for CSS11503. I have two devices one is master and the second is backup.SNMP configuration is the same on both devices. But SNMP Manager does not see backup CSS.What can be the reason? Management IP is the same for master and...

I have ACE 4710 which is connected at the center of the network and ACE connected to the LAN and outside connected to the Firewall where my DMZ is connected.Whatever traffic is passing from inside to DMZ it is getting slow. When I pass the ACE things...