Application Networking

Dear All,I will appreciate if someone can quickly clear one issues I have with APPx license. I just purchase one that is meant to enable WAAS feature. But after I activated the DATA license is permanent but WAAS is still showing right to use.Do we ne...

Running into an issue I've never worked with before.  Consider this scenario: Serverfarm1 and Serverfarm2 (physical servers) live on the same ACE behind this network:192.168.1.0/24Serverfarm1 and Serverfarm2's Load Balanced Addresses live behind this...

Hi all I was told that its a "feature" of the ACE whereby if bandwidth/connections exceed max allocation, that the ACE will send a HTTP status code of 302 back to the client. Now in our case, we are using layer 4 VIPs (albeit matching on ports 80/443...

Hi All,I am currently Using ANM5.2(0) and have noticed when trying to import a Device i get discovery failed, on digging i see that my ACS reports a 13030 TACACS+ authentication request missing a User name. I have done tcp dumps from the ANM server a...

Hello and thank you for reading.  I have an ACE30 (A5(3.0)) with an https probe configured to check for a page redirect and was working great until the servers it was checking updated their certs.  Since then, it has failed with a connection reset by...

Hi What is the differnece between bridge mode and one arm mode deployment Thanks

I follow the instruction ( http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v553/ws553xrn.html#pgfId-147099) , and every thing looks fine, during the installation. However the new BIOS are not activated during the next reload as it sh...

Hello, It´s my first topic and I have a hard issue related with Cisco ACE.We have a configuration load balancing a URL in the port 80 with no problems, but, with the port 443 is not working.Both the probe, serverfarm and realservers are OK (active) b...

Hello all, we are currently running 2x Cisco ace 4710 in active & standby mode. i am trying to upgrade them due to no support of TLS 1.1 & 1.2 Version. i tried to search the authentic way to upgrade them to correct version and procedure which could h...

We were recently setting up an application where the client PC requires a static IP address. After several reboots of the PC it was reporting duplicate IP address or the IP address would be changed to something other than the original static IP addre...

Hi, We have ACE 30 module context in bridged mode.Everything works fine, but the probes to the real server on the Standby are in a Failed state. After troubleshooting for a while, I have found, that this is somehow related to L2 and ARP responses.- R...