Application Networking

Hello,I have a question on how to setup load balancing on my CSMs located in my Data Center Distribution Layer, which consists of 6509s running Hybrid with CSMs running 4.2(5).I need to load balance an application that is always sourced from (2) Citr...

Hi,the customer has to loadbalance SSL traffic which is terminated on servers port 8001. But the clients need to communicate on port 443. So the customer provide the following configuration, but it isn't work. Does anybody know where is a problem? Th...

Dear Sir,I have the below senario.1) SiteA and SiteB are linked together by site-to-site VPN.2) A pair of 11501 are installed in SiteA for load balancing.3) SiteB are connected to Internet through SiteA. No direct Internet link in SiteB.4) SiteA can ...

Hi,I have the Cat4500 and I'd like to use WAAS for TCP optimalization. I can use only WCCPv2 for traffic redirection. I don't know which mask I have to set. I wrote that for Cat4500 is only one mask supported.I'm sending you the WCCP configurations o...

Team,Is the ACE module able to probe a specific context for a webpage? What would I need to configure on the probe to search for the following context?GET https://wil-02.testtnet.com/index.jspLook for “windows-password-username” The server admins...

I'm using Putty to cut/paste configs from a .txt file onto a CSS11503. The CSS seems to take the first line only, it pastes the other lines but the commands are not taken.Any ideas on if there's a way around this, so I don't have to paste 1 line at a...

I am looking for a process to upgrade the WAAS code on WAE-502's and 522's but without being on the production network and visible to the CM where the software patch is usually distributed from. Is there a way to manually do the upgrade by popping th...

Before installing WAAS and WCCP redirect on some 6500 interfaces in our data center, those interfaces showed Netflow flows for users at a remote location accessing servers at our data center. Now with WCCP redirecting that traffic to the WAEs, I noti...

HelloI have a pair of 11503's configured in one arm mode runnig version 08.10.1.06. Everything works well, but some clients connect to Oracle databases and run queries that last for 5 - 6 hours. The session is OK for 3-4 hours then the CSS issues a R...

Please I need technical data about Wave 274K9 and WAE 674K9. I also need a link to cisco documentation on the hardware. Many thanks for your help.

Show Tech from the 6509 switch the ACE module lives in ========================================================================== ACE#show module Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------...

Can I do this? should I got to a 4.1.1 version first then to 4.1.3.55? thanks

I started a prepositioning job. The directory has 4.25GB but WAAS is copying about 15GB and keep going. I've already verified that the directory to prepositionate was configured ok. Now, I am waiting that the job finish but I can imagine what's happe...