Application Networking

I had configured a http redirect to https using a serverfarm and a rserver redirect, but users get the IE warning about going back and forth between secure and non-secure. It appears from the docs that I could find that I want to do an action-list t...

Hi Friends,I have configured the WAAS boxes in my network. Iam using the WCCP method to redirect the traffic to the WAEs. Traffic is getting redirect to WAE, but the traffic optimization is not happening, it just passes through the WAAS boxes. I have...

I have a remote office that I would like to setup WCCP to filter Internet traffic. They have one subnet and a DSL connection to the Internet. I am looking for the command to firect traffic to the content engine.

How many maximum SSL Concurrent sessions can be achieved on ACE 4700 Appliance?Can ACE 4700 allows SSL and clear text sessions simultaneously to establish the connection to the same server farm?If I have to run two ACE 4700 Appliance to achieve redun...

We have a pair of Cisco's AXG web application firewalls that protect our internet-facing servers in a reverse-proxy fashion.One problem we have is the servers can only see the WAF's IP's instead of the end users'.Cisco TAC & SE's have confirmed there...

is it possible to configure one real server with four different TCP Ports?Here an example:SERVER1 is a webserver with four TCP Ports (80, 81, 82, 83)-- real server configuration moderserver SERVER1ip address 1.2.3.4-- serverfarm configuration moderse...

Hi All,Been really busy with a new ACE implementations... hectic :)AW, small question to all. We have the ACE (appliance) configured to transparently redirect http traffic of a service providers client base to a cache.ACE is configured in bridged mod...

hi, During performance testing with IBM Rational Performance Tester tool with 500 users, I noticed above 4000 connections in 'show conn' display and most of the connection states showed as 'CLSRST'. On doing search the meaning I found is 'CLSRST-ACE ...

I have 2 remote devices. Using the CM and looking at Dsshboard > Devices > Device1, then the Acceleration tab, I see "Insufficient data to plot the chart" for Optimized CIFS Sessions. I've got 25+ users at one location, and 3 users at the other. S...

I have a question regarding WAAS optimization of TSM traffic. I know there is a policy in the WAAS that applies TFO+LZ+DRE to TSM traffic on ports 1500-1502. On our network there are nightly TSM backups that kickoff and according to the WAAS its redu...

Hi allI have a WAAS installed and working properly, but i need to reset/clear all the results on the Central Manager (without changing or affecting the Configuration done on the WAE's)Is there any simple way to do it?Please adviseBest regards,

Hi,As the topic says does WAAS support acceleration of https traffic? If so where can I find this information?Also and more importantly where can I find performance and scalability information (Max Opt tcp connections, WAN capacity etc.) for WAAS and...