Sir, We have two WAEs registered with CM already and optimizing traffic. Now, after some routing change, one of the WAE cannot access the CM anymore. Will it keep on optimizing traffic without accessing the CM? Thanks
Hello all,my environment has an ACE 30 module in a Catalyst 6500 switch.I have a question regarding a serverfarm that have to switch connections to the prefered rserver, after it has returned back from unavailable.This is my serverfarm configuration:...
According to Cisco Website this is possible bug CSCTx03563 or CSCue38032.My 4710 is running 4.2(0). It mentions calling TAC for a script. Has anyone run into this and know what script needs run or what the work around is so that I can upload new code...
Hi Folks, I have a layer 7 policy at Cisco ACE 4710 working in that scenario: 1 - One VIP address used for 5 websites, responding in DNS to the same VIP address;2 - 5 class-map type http, matching the host header for each web site;3 - One Policy Map ...
Trying to get https://mail.abc.com redirect to --> https://mail.abc.com/xxxI've got the configuration working for: http://mail.abc.com --> https://mail.abc.com/xxx
Hi All, I am with a doubt about the traffic mapi intercepted by waas. I have a topology inline in both side Data Center and Branch office , but I see HTTPS, HTTPS works fine but MAPI I do not understand if a have a gain in acceleration, optimization ...
Hello allI'm trying out this new feature from A5(3.0) action-list type modify http ACTION-REWRITE-BODY content rewrite response content-string "ABC" replace "DEF" It looks like it only find the first match, replaces and forward response.Does anyone ...
Hello EveryoneI need some advice on the WAAS CM upgrade procedure.How do we upgrade a WAAS CM from 5.2.1 to 5.4.1, Unfortunately there is only a primary WAAS CM in the network and no secondary CM available as of now. I believe CM is the engine which ...
Hiİ have 2 different Nexus working diffrent NX-OS (6.0(4) & 6.2(6) ) with different line card (F2 & F2E ) and different Sup (Sup 1 & Sup 2 ) but share the same problem. Sup 2 devices work with VPC Sup 1 device Standalone this is the only difference...
Hello all!I need some advice.I'm conducting a PoC for WAN optimization which is built of the following devices:1.) Two Cisco 4451-X routers on each side of the WAN.2.) On one side of the WAN (the branch side), we have UCS-E series server with ESXi Ci...
I have a ACE20-MOD-K9 with version Version A2(3.5), and this Unexpected Reload:I have this code: last boot reason: NP 2 Failed : SRAM Parity Error Chan 3 I need a Workaround for this problem please.Thanks
I need to Know if its possible to configure a type of TCL script Probe in a Cisco ACe load balancer that will contact a back end server and execute a script(shell) , already locally configure in the server. this Server script will run and return bac...
Hi. I've got an rserver with the alias of the ace as GW. From that rserver can i ping to other ip's in diffrent subnet. But the other way i get no answear. So rserver(10.10.10.50) with ace as a GW(10.10.10.13) can i ping 10.10.11.20, but from 10.10....
Kindly help me to get the exact syntax to push the certificate to the standby CSS load balancer. I have uploaded the certificate in primary and working fine.CSS1# rcmd 10.10.10.1 "copy ssl ftp FTP import test2.cer DER "Password"" ...
