Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am using a CE 550 with CE 2.51(0) WCCP 2 and having a problem with ESPN loading extremely slow. I only see this using Internet Explorer if I try it using FireFox everything works normal. What I mean by slow is four to five minutes to load. If I tur...
Hi,i'm using transparent caching on a 11501 sending all http traffic to a BlueCoat Cache.I have set the failover bypass option.When the cache is down, the CSS bypass the cache, but the problem is that i want the http requests to have the CSS source a...
Can anyone help me.I have a few design questions regarding SSL Accelerators.A customer uses his web servers for SSL and is looking at introducing an SSL accelerator in between his firewall and servers. This box is purely going to do SSL accerlation a...
Upgraded Webns on 11800 from ap0500311s to ap0500510s. The virtual routers on all CSS's were down. As soon as we restored the switches back to WebNS ap0500311s, pings to VRRP addresses were working (as they were before the upgrade), & virtual router ...
hi,First of all I should say I'm not a CSS expert, so here goes ...On the css we have a content rule that listens to ip 1.1.1.1 on port 443 (NOT SSL, I use this port so customers don't have to modify their firewalls to be able to connect to the appli...
We have an ftp server running on port 10021. Is there a way to have the CSS translate the IP in the payload when not using port 21? On an IOS router one can use the ip nat service command. I have not seen anything like this on the CSS.We currently ha...
I have server farm that is consisted of 14 high performance servers and 6 low performance servers.So, I changed the configuration from round robin to weightedrr (weight 4 for high performance servers and weight 3 for low performance servers).And I al...
At a customer site any traffic running from the SCA through their CSS shows the SCA as the source IP in the server logs. I need to be able to set this up so the customer can see the real source address from their clients. I followed the docs on how t...
I have two server pools and one pool needs to periodically update the other, and both need to face the world. Both face the world just fine. When the .47 tries to update the .48 the packets are dropped by the css.Here is the switch config:CSS11503# s...
I have one pair of CE 565 and one pair of catalyst 6500.Want to do transparent caching for HTTP and HTTPS traffic.All the users are using proxy server to go to internet. Users do not require to configure their web browser.Currently, I have configured...
Hi,Im currently using a pair of CSS11150 in active, passive mode across 2 data centers as a shared service for multiple clients.I know the the throughput is 5gbps with default 128M memoryMy questions are (as the docs dont seem to provide this info) -...
Greetings:I have a configuration where I have two CSS attached to two WS 3550 switches. I'd like to connect an interface from each VLAN on each CSS to both 3550 switches (see attached). I have a problem when both of the interfaces are active in a VLA...
Hi,I just need help on the following;We have here 6500 with CSM installed having 2 real servers on 1 of the configured vlan.We could already access the applications running on this servers through the configured virtual IP and accessing databases fro...
Searching at cisco's site I was confused as far as concerns the upgrade of the CE590 ACNS version.Is it possible to upgrade from 4.X directly to 5.1 or it it must be an upgrade from 4.2 to 5.0 first and then to 5.1?Cisco says that uprgade from 4.2.1 ...
