Dear all, Actually which is fixed version for this bug? And there is BV ports information on Cisco Live Nexus3000 Architecture below.https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKDCN-3734.pdf It look like Chip name for using macsec...
Forum Posts
I have recently installed new web auth certificate on the WLC and I can see the new certificate under security>webauth>certificate. I rebooted the WLC but when I test web auth I still see the old certificate ? Old cert is still valid but only till 30...
Does anyone know what these codenames map to in reference to software versions?DNAC-ShockwaveDNAC-FrostDNAC-Frey
3548X / 3500X used to be able to allow RP to cater for /8 mcast range on PIM BiDir. That is now broken in v.9 and restricted to /24 only. Anyone else affected by this bug?
We're also facing this issue. We have two anchor WLCs and 4 foreign WLCs in a guest WLAN design (incl. ISE). Only one of the four controller showed this behavior. The interesting thing is that all four foreign WLC are in the same network (VLANs, etc)...
Hi out thereWe have been suffering under this problem now since we started upgrading to Big Sur - has anyone found a useable workaround here because to use the impact is worser that described here. Since the DNS resolution fails we cannot bring-up th...
SW1enaconf thostname SW1ip domain name tcrmbo.nlenable secret enciscousername admin password vtyciscocrypto key generate rsa2048ip ssh version 2banner motd #tekst#line vty 0 15transport input sshlogin localexitvlan 10name secretariaatexitvlan 20name ...
I believe this is also breaking PnP Claiming if you are using Golden Image SWIM associated with the site in the Hierarchy.
I'm experiencing this same bug even though I'm on a code version that is listed as a "Fixed Version". This is causing erroneous "up" and "down" alerts from our monitoring software. Very annoying.
Also seeing this on Windows 10 wiht a Microsoft LifeCam HD-3000. The webcam persistently stays on after launching a WebEx meeting with video. It's happened multiple times. The camera activity indicator remains on. Three processes are left running...
We also had this problem. Work around provided by cisco is un-acceptable. Anyone found the better solution?
Hi, is there any way to fix it with putty directly on the appliance?greeting Tom
Does anyone know a workaround for Mac OS on this bug?
Does this vulnerability affect a Nexus 3850? IOS 3.7.5E. All Cisco reference material seems to point to no, but all Cisco reference material at times makes me feel like I've entered cyclic like research where I think I find the answer, but am also n...
Question if I am reading this correctly. On this bug it states that it was fixed. Does that mean its fixed by using the workaround or it has been fixed via an updated piece of firmware. We ran into the bug after upgrading to 9.3.5 of NX-OS on a 93180...
