Cloud Calling

I am analyzing XSI documents and I found the fac access codes, but not how they are used, could someone help me and give me some guidance or an example?

Hi.I found that there are no feature access codes for call park (usually *68 for park and *88 to retrieve) on Utilities > Feature Access Codes page for my group SergeyKhim-Grp1.Is it possible to enable them ? 

Hi there.Music on hold is required for one test and there is instruction in test plan:1) Browse to the Call Control → Music/Video On Hold page for the BroadWorks userassociated with the DUT. Enable Music On Hold by selecting “On”.  But unable to do t...

I am trying to get the XSI event subscription working, but I do not get any Request to the given URL.I have added a Event Subscription by posting the following xml to com.broadsoft.xsi-events/v2.0/user/<userid><Subscription xmlns="http://schema.broad...

I would like to do a couple of tests from "BroadWorks Services – Meet-Me Conferencing" chapter of SIP Phone Interoperability Test Plan. Test plan says "As group administrator, browse to Meet-Me Conferencing → Meet-Me Conference Bridges".But unable to...

Could you please provide an IPv6 address for Outbound proxy for the group MariiaMedv-Grp1?

Hi there. There are chapter SBC/ALG Package in Broadworks SIP Phone Interoperability Test Plan. Test setup for SBC/ALG tests:1) Make sure the DUT is configured with a private address.2) Enable the DUT’s outbound proxy setting and configure as the SBC...

Hi,Is LAST-NUMBER-REDIAL service enabled for users in the group MariiaMedv-Grp1? Please enable if it is not.

Hi there. There are chapter Redundancy Package in Broadworks SIP Phone Interoperability Test Plan.Test setup for Redundancy tests:1) Make sure the DNS server is configured with the following DNS SRV records withpreferred order of addresses as follows...

Hi, I can't loging to my group today MariiaMedv-Grp1. I see en error message "  Your account has been disabled. Please check with your System Administrator."Could you please help me?

Hello,I want to have an phonebook with all group users. The only thing I can't figure out is how I can get the current state of a user, for example: alerting or released/on-hook.If you need anything, feel free to ask.

 we are able to get success response without port (8011 or 8012) but we need to get confirmation from Cisco broad-soft core team to deploy the same thing in production. We are sending the same input with different types of ports(with out port , with ...

how can i place a call in local hold and then return it to its normal state.I'm using "calls / <call_id> / hold", but put the call in remote hold and can't put it back in the active call state. help please 

How to change the status of a call from "Held" to "active"? i use "calls/<callid>/Reconnect", but it doesn't work for me.