Cisco meeting Server 3.1

[NavinkumarSaravanan82912]

Hi,

I have upgraded the CMS 2.8 version to CMS 3.1 and I have successfully configured Callbridge, Webadmin and Webbridge3.
In the CMS 3.1 WebGUI received an error "This CMS is not licensed. CMM is now required for licensing. See deployment guides" and I tried to access the CMS Web app received the error 'System is currently unavailable
Please try again later"

I have attached the screenshots too

Please help us to solve the issue

Regards,

Navinkumar S

[Roger Kallberg]

I would recommend you to open a SR with TAC for this.

[Marek (gaman-gt.com)]

have you looked at the CMS 3.1 Configuration document, I thnk that it explains everything, here is the link CMS 3.1 Doc  - chapter: Task5:SelectingandSettingLicenseDetails

[Nithin Eluvathingal]

if you have valid SWSS, open licensing SR for CMS3 license.

From CMS version 3.0 the CMM version 3.0  is a mandatory requirement. Otherwise the licensing warning remains and call bridge service cannot be activate.

The below document explain how  install license for CMS 3 using CMM.

https://www.cisco.com/c/en/us/support/docs/conferencing/meeting-server-1000/216093-how-to-install-and-activate-a-local-lice.html

[Vinod.s]

For CMS 3.1 - CMM is mandatory and i guess you have to use Smart licensing .

I would suggest read CMS 3.1 guide and raise case with TAC for further clarification  .