11-20-2018 11:38 PM
Hi Guys,
Is it possible to disable or remove call forwarding feature on Cisco Jabber? I am using CUCM 11.5.
Thank you.
Solved! Go to Solution.
11-22-2018 06:17 AM
Slavik's suggestion is not applicable to Jabber as there are no softkeys.
There is no way to remove the option from the client, all you can do is adjust the CSS parameters to limit the destinations.
11-21-2018 12:24 AM
You can start with removing the Call Forward softkey button from the Softkey Template. That way all phones won't show this button anymore.
Of course, you can also double proof it by changing the Call Forward CSS of the relevant lines to "None", that way if a user has a Cisco Jabber he won't be able to configure the forward, and not even from the Self Care Portal.
11-21-2018 11:16 PM
Hi Slavik,
Thanks for the reply.
I already tested on my environment, but unfortunately I am still able to set call forward. Below is my setting that I applied. Maybe I did not set the device incorrectly.
I removed the Forward All option from the softkey template.
I also changed the softkey template on my Android Device.
And I already set the CFA to <None>.
Please advise. Thank you.
11-21-2018 04:05 AM
11-21-2018 11:19 PM
Hi Jonathan,
Well, if it cannot be removed, at least it cannot be used by the users. Since it is prone to be abused by the users.
I already tested the configuration as Slavik mentioned above, but unfortunately I still can forward the call. Do you mind to take a look? Maybe I missed something. Thank you.
11-22-2018 06:17 AM
Slavik's suggestion is not applicable to Jabber as there are no softkeys.
There is no way to remove the option from the client, all you can do is adjust the CSS parameters to limit the destinations.
11-22-2018 05:42 PM
Hi Jaime,
Thanks for the help. Now I am able to disable the call forwarding with the configuration attached.
09-07-2023 08:35 AM
Jaime,
First, nice name. Second, has there been any change to this behavior? We have a contact center with Jabber and we are now finding some agents are purposefully forwarding their agent extensions to numbers we won't allow resulting in failed inbound calls. Is there any way to stop them from doing that? Even if it's an msi flag, I'm open to anything here. Also, does the WebEx app allow us to restrict that?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide