ā10-25-2017 01:48 AM - edited ā03-17-2019 07:09 PM
Hi,
How to access jabber-config.xml file to make some changes. Can i download the file from CUCM TFTP console? Thanks
ā10-25-2017 07:31 AM - edited ā10-25-2017 07:32 AM
Hey there,
So the easiest way I found is to TFTP the existing jabber-config file from CUCM to your PC. You can CLI into your CUCM Publisher and use the "file get tftp jabber-config.xml" command. From there you can edit the file as you need and then upload it via the OS Admin page and restart your TFTP services.
ā10-25-2017 12:12 PM
ā08-07-2023 05:49 PM
I just installed a 12.5 su3 and no jabber file is on the pub after activating tftp? any other ideas?
ā08-07-2023 11:28 PM - edited ā08-07-2023 11:29 PM
In version 12.5 you can put in the configuration that you would have in the Jabber XML file in the CM webUI. To answer your question about why there is no file present itās because there is no file from start, youād need to create the file and upload it.
ā08-10-2023 08:46 AM
I also think that because I didnt have SRV set up correctly that the network connectivity test didnt install it. I've read that somewhere else. I only installed a quick 12.5 su3 pub to get the file as ours was removed from all nodes. I'll try this suggestion. Thanks
ā08-10-2023 09:36 AM
To be clear, there is no configuration file present at installation. You need to create that yourself.
ā08-14-2023 04:44 PM - edited ā08-14-2023 04:45 PM
Thanks Roger, another related question. Are you aware if I actually need to use the XML to have jabber participate in hunt groups when in phone only mode such as was noted in another thread? I am using 14.1 on prem not MRA. Also is there the standard limit of only 1 hunt group association?
I appreciate you!
Thanks is Advance!
ā08-14-2023 11:53 PM - edited ā08-14-2023 11:55 PM
With the version of CM that you have there is no need to have an XML file at all. Create the configuration as @Ibrahim AlQumairi outlined and create specific service profiles that you associate the users with. You can and I recommend that you do, specify one service profile as the standard/default one, with that you donāt need to assign that to your user accounts. If not all your users need to have hunt pilot capabilities youāll need to create a separate service profile for this, that is associated with the Jabber configuration that includes the setting to enable login/logout from the hunt pilot, and then youāll associate that with the user(s) that needs the hunt pilot login/logout functionality.
On your other question, I assume that you by āhunt groupsā means line groups. There is for sure a limit on the number of line groups that you can associate the directory number with, but a line group can be made a member of multiple hunt lists and thereby multiple hunt pilots.
ā08-15-2023 09:30 AM
Thank you, thats great to know for Jabber for windows. In order to have Jabber mobile without a sim, I need to make iOS or android know when I access a webpage with a phone number on it I can click it & dial it, which it currently cannot. I believe I need to enable the >EnableCiscoTel> via xml in order for this to work?
ā08-15-2023 09:39 AM
Thatās an off-topic question to the OP. Please create a new post to ask this question.
ā08-09-2023 01:07 PM - edited ā08-09-2023 01:18 PM
The location and process of modifying the Jabber configuration file depends on the CUCM version.
ā08-15-2023 10:42 PM
@techguy Why have you not marked this post as answered? Youāve got at least two perfectly applicable responses here that answers your question.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide