05-06-2012 06:29 AM - edited 03-17-2019 02:18 PM
Dear Networkers,
We are using Cisco Jabber for windows 9.0.1 with Cisco Unified Presence 8.6 and CUCM 8.6
We are using CUPC 8.6 also.
We can successfully login using Jabber. but we cannot retrieve contacts when searchng.
We have AD integration with CUCM (synchrinisation) and with CUPS done successfully. The wierd the wierd thing is that when we login using CUPC we can search contacts and add them.
Can you please advise ?
Thanks.
05-06-2012 08:45 PM
Hi
We had the same symptom when the windows workstations were not in the same domain than the ldap referenced by cups. We had to manually generate a config file as described in jabber config guide
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_0100.pdf
If you are fully integrated into the same AD domain it should not occur.
I also confirm that a CUPC client on the same PC was working fine without any manual config so provisioning process is different b/w CUPC and jabber 9.
Regards
Christophe
05-27-2012 09:46 PM
Hey,
To add to what Chris mentioned, you can also reference the following KB article for EDI deployment:
https://supportforums.cisco.com/docs/DOC-24137
If you are at CUCm 8.6(2), you can also deploy UDS: Configure Cisco Jabber for Windows to use the directory service
Regards,
Jas
05-31-2012 02:32 PM
I had same problem, you need to put the config file (attached) on the path C:\Users\yourname\AppData\Roaming\Cisco\Unified Communications\Jabber\CSF\Config and be sure that you can access the presence server by name (dns or hosts file). Before you login you must to configure the presence server by name, not by IP.
Regards
Carlos
06-01-2012 04:27 AM
What field are you using to sync the users from ad?
If it's different from the default sAMAccountname, then you will need to configure it in the jabber-config file.
For futher details, you can check out the docs here:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide