Are you able to try using either the External Phone Number Mask or setup any Calling Party Transformations from CUCM to the Edge / Expressway RP? I think it would be easier to manipulate the digits before it gets to Webex than to try and make Webex understand a 5 digit pattern.
By default Webex does not show the calling number even without Edge Audio. You can enable it under it on the site through Control Hub; however, it never displays calling name and masks the last few digits of the number eg “Call-in user 404555****”. If you want the participant to be fully identified they need to enter their participant code or use callback.
Is there a way in UCCE with using an admin script maybe using the email application in Call Studio to send out an email? I know in UCCX you can send out an email if the script were to fail but is there a way to do it in UCCE? Any help would be great!
Fun lab with Packet Tracer and running Cisco CME with 3 ip phones, 3 laptops, 1 switch, and 1 router. Fun lab with repetition. You will be able to test your phones and laptop for connectivity etc. Solution;see attached CME Packet Tracer L...
How to configure IP Address for Cisco Integrated Management Controller CIMC. The Cisco Unified Computing System (UCS) is a data center product composed of computing hardware, virtualization support, switching fabric, and management software.
QuestionHi Team,I just need to confirm if we change NTP servers on UCCX, will it affect the license on UCCX 12.0 ?Do we need to re-host after updating NTP?Already done on CUCM and CUC , and it didn't affect but not sure for CCX. Thank you ...