Windows Jabber (voice only) configuration with CUCM 9.1

[Vivek Batra]

Hi friends,

I want to deploy Windows Jabber having voice only service (no CUPS, Unity etc) with CUCM 9.1.

Can you please redirect me to some good documentation which can enable me to configure Windows Jabber (voice only) configuration with CUCM 9.1?

Thanks

Vivek

[Paul Stojanovski]

This might be a good source of information.

http://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/116446-technote-product-00.html

-P

[Suresh Hudda]

It is pretty easy...just you need to configure a CSF device. end user and create a UC service, CTI Service profile  and assign this to end user and test it by installing Jabber 10.5 on desktop/laptop.

Suresh

[Suresh Hudda]

And dont forget to edit host entries (DNS) in local desktop/laptop where you will install jabber.

Suresh

[Vivek Batra]

Hi Suresh,

Thanks, normal calling worked. Will check further and post if face any issue.

-Vivek

[Vivek Batra]

Hi Paul,

Thanks for sharing the useful information.

-Vivek