Collaboration Knowledge Base

This document was generated from CDN thread Created by: jerome corbin on 03-05-2010 02:57:49 PM hello,E20 is compatible with OCS and the mediation server (telephony IP) ?We have a E20, a OCS server, a OCS Mediation server and a SIP gateway for the me...

This document was generated from CDN thread Created by: henry kyburg on 28-04-2010 06:23:36 PM I am finding video drops on the HDSDI outputs of the 1080P Cameras. I have 3 C90s, 4 1080P Cameras, in 3 different installations. All 4 cameras exhibit thi...

This document was generated from CDN thread Created by: Frank Pajak on 28-04-2010 05:52:24 PM We are using the API thru a Crestron Pro2 Interface to send the commands for the presets. The Flow for this is we send the Pan Tilt Command, then the Zoom C...

This document was generated from CDN thread Created by: Timothy Shire on 28-04-2010 05:25:55 PM Where can i get the .wsdl(Web Services Description Language) file for these products?We are working on a booking package and need this to assist in the in...

This document was generated from CDN thread Created by: Aswien Behari on 28-04-2010 09:03:39 AM Hi all,We have been using the document “ TANDBERG Content Server Creating and managing a TCS cluster S3.3” for cluster management. In section 2 Main Featu...

This document was generated from CDN thread Created by: Bret Wittmann on 28-04-2010 03:51:04 AM In the example for registering xevents, there is an example " xfeedback register /Event/CallDisconnect" -- However when I type "xevent ?" I don't see "cal...

This document was generated from CDN thread Created by: Bret Wittmann on 28-04-2010 03:37:58 AM I am working with a C90 with TC 3.0 and I have been asked to emulate the Speed key pop ups the appear on the OSD -- yet I don't receive any feedback when ...

This document was generated from CDN thread Created by: Arne Kampesæter on 27-04-2010 03:15:28 PM I`m not sure if I`m missed anything or what. My C60 is sending out xstatus systemunit uptime on rs232 for about every 20 second. This crashes sometimes ...

This document was generated from CDN thread Created by: Graham Fry on 27-04-2010 01:45:48 PM We have a Crestron MPS series Media Manager connected to various sources - but cannot get acceptable sound quality from the Tandberg Video systemAll other so...

This document was generated from CDN thread Created by: Brad Omori on 24-04-2010 05:30:42 AM What are the Maximum speeds for the pan and tilt in the PT_Direct Command Packet where 0p = max pan speed and 0t = max tilt speed ?8x 01 06 02 0p 0t 0q 0r 0s...

This document was generated from CDN thread Created by: Lance Logan on 23-04-2010 03:30:18 AM I've been asked to enable Far End Camera Control in a group of rooms that have C60 codecs being controlled via AMX. Here's the catch; the cameras are contro...

This document was generated from CDN thread Created by: Jeevan Varughese on 22-04-2010 11:25:41 PM hi,can the extension kit for the Precision HD 720P cameras be used with the Precision HD 1080P camera?I need to extend the Tandberg C40 Camera to about...

This document was generated from CDN thread Created by: Joshua Pack on 22-04-2010 04:17:23 PM According to the release notes for TC3 (reference pg 11 of [url=http://www.tandberg.com/collateral/documentation/Software_Release_Notes/TANDBERG%20TC%20Soft...

This document was generated from CDN thread Created by: Gignac Zacharie on 21-04-2010 02:38:48 PM I just want to know if the T-Link sockets behind a C60 will be used in the future ?Is this cobranet audio sockets ? Because if so, I will buy a DSP with...

This document was generated from CDN thread Created by: Aditya Koundinya on 20-04-2010 11:26:06 PM When I am trying to modify the end time of an ongoing conference it says you cannot modify the start time of an active conference. This would come into...