02-14-2014 02:50 AM - edited 03-15-2019 05:57 AM
Hi,
We're planning to upgrade our CUCM from 8.5 to 8.6.2 and I am finding some contradicting information with regards to upgrading the jtapi client on the PG's so that they match the CUCM version. So just wanted to check with you guys what would be the correct procedure?
option 1
=======
Stop pg processes
upgrade jtapi client
reboot
start pg processes
option 2
=======
stop pg processes
uninstall old jtapi client
install new jtapi client
reboot
start pg processes
Thanks in advance for your insights.
Rgds,
Jeroen
Solved! Go to Solution.
02-14-2014 03:07 AM
02-14-2014 05:27 AM
I concur and don't forget to do this on side B as well.
Chris
Sent from Cisco Technical Support iPhone App
02-14-2014 05:34 AM
I don't think a reboot is required either if you want to do this faster.
david
02-14-2014 03:07 AM
Hi,
option 1 would do.
G.
02-14-2014 05:27 AM
I concur and don't forget to do this on side B as well.
Chris
Sent from Cisco Technical Support iPhone App
02-14-2014 05:34 AM
02-14-2014 05:42 AM
Hi Guys,
Thanks for all your replies.
I have in the mean time also tried it on a lab enviroment and can confirm option 1 works (even without a reboot indeed).
Thanks,
Jeroen
02-14-2014 09:33 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide