12-02-2020 09:32 AM
Dear,
I have an IVR within the express Contact center, that if they press an option it should be redirected to an external call (PSTN). This was solved with the Call redirect step.
The problem arises that although the circuit is working correctly, that call remains within the CUIC with disposition 1, even if it is answered successfully.
Is this so, or is there some other option to transfer a call outside the IVR and that the disposition remains connected and not abandoned.
thanks
Solved! Go to Solution.
12-02-2020 09:46 AM
You will need to use the Set Contact Info step in the Successful branch of the Call Redirect step to mark the call as Handled.
E.g.,
Call Redirect (--Triggering Contact-- to "1234") Successful Set Contact Info (--Triggering Contact--, Handled) End ...
12-02-2020 09:51 AM
12-02-2020 09:40 AM
Did you try a Place Call step?
JB
12-02-2020 09:46 AM
You will need to use the Set Contact Info step in the Successful branch of the Call Redirect step to mark the call as Handled.
E.g.,
Call Redirect (--Triggering Contact-- to "1234") Successful Set Contact Info (--Triggering Contact--, Handled) End ...
12-02-2020 09:51 AM
thank you.
It worked correctly.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide