03-20-2017 02:07 AM
I am new to finesse.I even don't know the basic steps to start with.
03-20-2017 11:28 AM
Hi Shubham,
Take a look at the DevNet Finesse page: Cisco DevNet: Finesse. There is an overview, getting started, learning labs (tutorials), sandboxes (free developer use environments), etc.
Thanx,
Denise
03-20-2017 10:34 PM
I've gone through there but din't got clarified way to start with.
Just wanted to know the basic steps of installation and getting started.
Thanks
Shubham
03-21-2017 10:44 PM
I'm done with the setup of finesse.
also done with basic rest apis but when I am trying to login agent its giving me error as "Device associated with that extension or dial number is invalid."
Do I need any hardware(softphone) such as x-lite or ekiga as I am working with linux?
Thanks
Shubham
03-22-2017 08:32 AM
Yes. You need a hard or softphone to be connected to the callmanager. I am not sure which softphones work on linux. Most people typically use Cisco Jabber but it doesn't have a linux version.
Thanx,
Denise
03-22-2017 09:29 AM
I've installed ekiga softphone on linux but not able to connect it with
call manager.
Can you guide with steps to be followed..
Thanks
Shubham
03-22-2017 09:37 AM
Hi Shubham,
I've never connected a ekiga softphone to callmanager before, but here is a post using an older call manager version: [Solved] Ekiga Softphone Third Party SIP Endpoint Registration in CUCM
Hopefully it can help.
Thanx,
Denise
03-22-2017 11:33 PM
Hi Denise,
When I am trying to for agent login I am getting error as
"Device associated with that extension or dial number is invalid."I've
checked almost everything but the setup seems to be fine to me.
I've set finesse server on devnet sandbox.
Thanks
Shubham
03-23-2017 12:16 AM
PFA error message
On Thu, Mar 23, 2017 at 12:02 PM, Shubham Sharma <
03-23-2017 12:17 AM
03-23-2017 03:22 AM
Third party SIP endpoints don't have CTI support so even if you registered it with CUCM it isn't going to work. However, you could use it as a mobile agent if this is on CCE. You could also create an Extend & Connect device with an associated physical remote destination to get something working to sign-on to and take incoming calls. Be aware that not all call control functionality will work.
03-24-2017 12:35 AM
Hi,
I am stucked at this place i.e. Agent Login into finesse agent desktop.
03-24-2017 09:48 AM
Hi Shubaham,
As Paul pointed out, you probably want to use mobile agent (assuming this is CCE). Here is a doc on how to configure it: Mobile Agent Guide for Cisco Unified Contact Center Enterprise & Hosted Release 9.0(1) - System Configuration for Unifie… It is an older doc, but I think it still applies.
Thanx,
Denise
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide