01-15-2014 06:03 AM - edited 03-14-2019 12:57 PM
Hello all,
We are working on a UCCE system 9.0
Is it feasible to keep the agent state available even if the call was not answered ?
if so, where this setting can be changed?
Thanks in advance
Lara Noueir
01-15-2014 02:02 PM
agent state on no answer is only changed to not ready if you set it in the agent desk settings... if you dont set rona, it remains as it is
Sent from Cisco Technical Support Android App
01-15-2014 11:44 PM
Hello oabulaban,
Thanks for the reply.
We don't want to disable the RONA function, all what we need to do is to keep the agent state ready after RONA.
do you have any idea on this?
Thank you,
Lara Noueir
01-15-2014 11:48 PM
is this UCCE with cvp or ipivr?
if cvp, you can leave the RONA configuration on cvp as it is while removing it from agent desk settings.. functionality will work but agents will remain READY (no idea how this will affect reporting though)
i am not sure abt ip/ivr, but i think that might not work on it as i think its only configured in agent desk settings.. been a while since ive worked in ip/ivr
Sent from Cisco Technical Support Android App
01-16-2014 08:20 AM
is this UCCE with cvp or ipivr?
if cvp, you can leave the RONA configuration on cvp as it is while removing it from agent desk settings.. functionality will work but agents will remain READY (no idea how this will affect reporting though)
i am not sure abt ip/ivr, but i think that might not work on it as i think its only configured in agent desk settings.. been a while since ive worked in ip/ivr
Sent from Cisco Technical Support Android App
01-16-2014 09:37 AM
Hello Oabulaban,
I tried to remove the RONA configuration from agent desk setting while keeping it in CVP, but this has not solved the issue and the agent state changed to Not Ready..
Do you have another workaround that can help?
Thank you,
Lara
01-16-2014 10:12 AM
can u try setting the rona in agent desk settings to 10 seconds longer than the rna timeout on cvp? please make sure after changing to it to log out the agent completly (close ctios even) and then run it again and see
Sent from Cisco Technical Support Android App
01-17-2014 12:54 AM
Hi Oabulaban,
It worked, thank you so much for your assistance.
Best Regards,
Lara
01-17-2014 12:07 PM
great.. it should also work if you don't set a RONA value in agent desk settings.. i would recommend trying to configure a new agent desk setting and not put a value from the start, and test it this way and see :)
Sent from Cisco Technical Support Android App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide