11-09-2017 10:22 AM - edited 03-14-2019 05:42 PM
Hi All,
We are facing an issue where Agent is getting call from customer even if he is logged out of Finesse.
We are using Cisco 7945-SCCP and Cisco 8841-SIP IP Phones with Extension Mobility and Agent doesn't log out of extension mobility when he log out of Finesse.
CUCM and UCCX version is 11.5
Call flow is like below.
Customer --> US PBX --> H323 Trunk --> CUCM-India --> Phone
Solved! Go to Solution.
11-10-2017 06:51 AM
Looks like extension 46789 was dialed, is that the extension on the phone? if so, it appears the call is going directly to the extension and does not come from CCX which means the CCX/Finesse is not involved here at all.
12-14-2017 12:20 PM
11-09-2017 11:40 AM - edited 11-09-2017 11:43 AM
How do they logout of Cisco Finesse? Do they sign-out or like most agents, do they close the browser or logout of the workstation?
UCCX takes up to 120 seconds to detect the 'disconnection' and then, I believe, it takes additional (up to) 30 seconds to auto-logout the agent... which is a grand total of 180 seconds. However, typically it takes less than 30 seconds - from what I noticed... hence, "up to". Just make sure they sign out of Cisco Finesse.
When do they notice this problem? 30 seconds after logout or 3+ minutes?
11-10-2017 06:28 AM
Hello Mark,
1. Agents used to click on sign out button in Finesse to log out of finesse.
2. There is not specific time after logging out of finesse. Agents are getting calls ever after 30 Mins or 6 Hours after logging out of Finesse.
11-10-2017 05:54 AM
Are you sure the calls arrive via CCX? Perhaps it's a direct call to that extension. You can review CCX CUIC reports and CUCM CDR records to confirm.
11-10-2017 06:32 AM
Hi Chris,
I pull the real time trace from RTMT for one such call. And i found below. What you can say looking at below. This call looks like direct call to agents extension.
11-10-2017 06:51 AM
Looks like extension 46789 was dialed, is that the extension on the phone? if so, it appears the call is going directly to the extension and does not come from CCX which means the CCX/Finesse is not involved here at all.
11-10-2017 06:58 AM - edited 11-10-2017 06:58 AM
Yes, Its an extension assigned to Agent.
Line-1 - 46789 - For Incoming Calls
Line-2 - 46891 - For Outgoing Calls
11-13-2017 08:28 AM
This problem is most likely caused by 1. the agent(s) provided their contact information to the caller weeks or months ago, or 2. the agent(s) might be advertising their contact information via Outlook GAL or signature block. Honestly, what I would do is... call the user back and ask them. Or, you can ask the agent.
Of course there's other possibilities but it looks like this caller was external. If so, this would likely eliminate the other possibilities.
12-14-2017 12:20 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide